|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
01-15-2015, 09:14 AM
|
#1 |
|
Getting Wild
 Join Date: Jun 2012
Location: Florida
Posts: 90
|
stretching a G9
Any ideas for shifter cables and accelerator cable?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-19-2015, 08:31 PM
|
#2 |
|
Getting Wild
Join Date: Jun 2012
Location: Florida
Posts: 90
|
Re: stretching a G9
|
|
|
|
|
01-19-2015, 08:39 PM
|
#3 |
|
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: stretching a G9
Nice job......my neck hurts though from turning sideway's
 |
|
|
|
|
01-20-2015, 07:04 PM
|
#4 |
|
Getting Wild
Join Date: Jun 2012
Location: Florida
Posts: 90
|
Re: stretching a G9
I don't know why the pics turned like that. Anyone have a line on side pillar covers? Im obviously gonna need more.
|
|
|
|
|
01-20-2015, 07:55 PM
|
#5 |
|
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: stretching a G9
Check for stock cables to fit limo carts is my only idea. Though I thought about simply running a rod/pipe under the rear floor and mounting the shifter/arm behind the rear seat to hold the cables. Then rod down and bellcrank on that pipe up to the front seat and another rod up to the new shifter there. However then I thought why use that stock shifter, figure I would make a better one that moved froward/back if I went to the trouble to make a limo. In that case you could simply run a rod under the floor (off the new shifter you make) back to the rear seat/engine area and hook it to the stock shifter, move the stock shifter sideways inside there.
|
|
|
|
|
01-29-2015, 09:16 PM
|
#6 |
|
Getting Wild
Join Date: Jun 2012
Location: Florida
Posts: 90
|
Re: stretching a G9
New pics
|
|
|
|
|
01-30-2015, 06:21 AM
|
#7 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,046
|
Re: stretching a G9
Nice work so far! Looks great
 |
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
02-09-2015, 07:17 AM
|
#8 |
|
Getting Wild
Join Date: May 2011
Posts: 93
|
Re: stretching a G9
Awesome work. How much length did you add for the stretch?
I see a vanguard in the background as well! |
|
|
|
|
02-09-2015, 09:19 PM
|
#9 |
|
Getting Wild
Join Date: Jun 2012
Location: Florida
Posts: 90
|
Re: stretching a G9
I added 35" and used 1 1/2" black pipe. The vanguard in the back ground is going in a g8. I do have one in my other g9 though. The stretch is a cross between a g9 and a g2
|
|
|
|
|
02-10-2015, 08:50 AM
|
#10 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: stretching a G9
Half G-9, half G-2, does that make it a G-7?
 |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Stretching a Club Car | Design Center | |||
| Stretching cart | Design Center | |||
| Question about stretching an EZ-GO PDS | Electric EZGO | |||
| Stretching? | Design Center | |||
Linear Mode
