|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-10-2018, 12:30 PM | #21 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Cart not doing anything
At first look I'm not finding it on my 2013, Is this all year YDRE models?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-10-2018, 12:40 PM | #22 |
Getting Wild
Join Date: May 2017
Location: Dallas, TX
Posts: 116
|
Re: Cart not doing anything
Mine is on the vertical frame support right behind the batteries under the drivers seat. The wire is zip tied to the column and there is a little black rubber square sticking off it (maybe 1”x1”) and when you pop off the top, it exposes the fuse (which takes a good tug to get out). The box is probably 4” or so south of the r/t switch
|
05-10-2018, 12:50 PM | #23 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Cart not doing anything
Thanks. I'll look harder
|
05-10-2018, 12:54 PM | #24 |
Getting Wild
Join Date: May 2017
Location: Dallas, TX
Posts: 116
|
Re: Cart not doing anything
Post #12 is a picture of mine blowing if you want a picture of my long *** description haha. Chances are yours will be different though because of the 6x8 tray so I’ll just keep quiet
|
05-10-2018, 02:24 PM | #25 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Cart not doing anything
Yep, forgot the location has changed, like in 2013 or something.
|
05-10-2018, 05:25 PM | #26 |
Getting Wild
Join Date: May 2017
Location: Dallas, TX
Posts: 116
|
Re: Cart not doing anything
Just threw in a 10a 32vdc and it turned right on! CGTECH FTW and shame on Alltrax for not mentioning this and including a fuse... week of wasted riding ;)
I am going to leave in in the "Run" position for the next few hours and monitor for fire but I think we are good to go. Thanks Scotty for your help as well |
05-12-2018, 07:57 PM | #27 |
Getting Wild
Join Date: May 2017
Location: Dallas, TX
Posts: 116
|
Re: Cart not doing anything
So... shame on me. When I installed the upgraded fuse I turned the key, saw the voltage meter turn on, and heard the fan of the alltrax come on so I "thought" all was fixed . Tonight I actully tried to drive it... got nothing...
Turned the cart off and on a few more times and realized the solenoid still isn't clicking. Across small poles I had 0v so I tried testing individually. voltmeter positive on small left pole and voltmeter negative on battery pack got me full pack voltage. Voltmeter negative on small right pole and voltmeter positive on battery pack got me 8.4v. This seems to be a big problem, shouldn's I have 50.8v there as well. Ofcourse this black negative wire is wrapped in all sorts of plastic tubing so it is going to take me a while to cut it all apart to figure out where the negative is going bad but was curious if anyone had any idea where to start looking for the end of the negative? Also, the Alltrax is showing 1 green 6 red.. "precharge failure". I have an xct500 which doesn't use the precharge piece... I am assuming this is due to the bad negative? HELPPPPP |
05-13-2018, 12:10 PM | #28 |
Getting Wild
Join Date: May 2017
Location: Dallas, TX
Posts: 116
|
Re: Cart not doing anything
Found the attached picture... looks like I need to test pin 3 to see if the internal negative in the controller is broke. Any tips how to do that? plugged or unplugged?
Thanks |
05-13-2018, 01:35 PM | #29 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Cart not doing anything
I believe it to be a straight shot from controller pin 3 to solenoid B-. I would remove the diode too, for now.
|
05-13-2018, 01:57 PM | #30 |
Getting Wild
Join Date: May 2017
Location: Dallas, TX
Posts: 116
|
Re: Cart not doing anything
CGTECH, how do I test if there is a disconnect inside controller? Can I disconnect 26pin and turn on cart? Or will that hurt something? There has to be a reason my negative is only showing 8v
|