|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-07-2009, 09:01 AM | #11 |
Not Yet Wild
Join Date: Oct 2009
Location: canada
Posts: 19
|
Re: Taking off G2 governor
BY the way. Can you remember which cable you used. The one from carb to the governor or the cable from the govenor to pedal, to use for the staight line cable from pedal to carb??
thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-07-2009, 09:29 AM | #12 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: Taking off G2 governor
Pedal to gov cable.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
10-07-2009, 11:03 AM | #13 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: Taking off G2 governor
You can just leave slack in the cable at the carb, but it will still go fast just not get there as quick. In fact the last 1/3 or so of carb throttle does very little, most stock carts never use all of it. I gps'd mine and it only made a tiny difference when the rpm were quite high, maybe .5mph or something, and I have my governor drilled on it since day one in '99. I had to take the pedal off and move it up a notch on the spline to get enough cable travel.
Pedal cable is only one that will reach. |
10-07-2009, 11:50 AM | #14 |
Not Yet Wild
Join Date: Oct 2009
Location: canada
Posts: 19
|
Re: Taking off G2 governor
Thanks alot guys. When I get it all done I will post how it went.
|
10-07-2009, 01:08 PM | #15 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,858
|
Re: Taking off G2 governor
[QUOTE=sho305;293694]Hey Spriddle, NewGuy....way too busy of a summer! I get stuck outside and no PC time to chat. Get to rebuild two G9 motors now should be fun.
.................QUOTE] Well, we're glad to see you still around. |
|
|
10-07-2009, 05:24 PM | #16 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: Taking off G2 governor
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Help Taking Motor Off | Electric EZGO | |||
04 CC dies when taking off | Gas Club Car | |||
Whistling sound when taking off | Gas Yamaha | |||
hesitation when taking off | Electric Club Car |