EZ GO canopy top on my club car?

a70eliminator · 01-21-2011, 06:22 PM

My cc had no top or frame when I got it. I was given an EZ GO top only no framework, it looks it wouldn't be too hard to build a frame for it either from conduit or maybe even some PVC pipe, anyone have some hands on experience, ideas you could offer, do's & don'ts? It appears to be a well built top with handles molded into it. Thanks.

LostHusker · 01-21-2011, 06:55 PM

Not sure if anybody has done it or not, but I am sure someone has. You have the top, if you are able to bend and create it yourself go for it. Take pics along the way. Good Luck!

Woodchiper · 03-15-2011, 04:55 PM

I wouldn't use PVC due to it will break as it ages. Get some 1/2 square steel tubing and hope you got a bender or take it to a shop to bend. Welding the truns is not a bad ideal

carryalltwo · 03-19-2011, 05:08 PM

I have a cc that I bought with an EZ Go top that was not installed. The local cart shop took it in as trade in for the correct one.

I wanted to make my own frame but did not have the tools to do it the way that i wanted. If you do bend your own frame, diamond plate would make a cool roof.

01-21-2011, 06:22 PM	#1
a70eliminator Getting Wild Join Date: Nov 2010 Location: Northeast Ohio Posts: 115	EZ GO canopy top on my club car? My cc had no top or frame when I got it. I was given an EZ GO top only no framework, it looks it wouldn't be too hard to build a frame for it either from conduit or maybe even some PVC pipe, anyone have some hands on experience, ideas you could offer, do's & don'ts? It appears to be a well built top with handles molded into it. Thanks.

01-21-2011, 06:55 PM	#2
LostHusker Just one day at a time Join Date: Sep 2009 Location: South TX Posts: 8,650	Re: EZ GO canopy top on my club car? Not sure if anybody has done it or not, but I am sure someone has. You have the top, if you are able to bend and create it yourself go for it. Take pics along the way. Good Luck!

03-15-2011, 04:55 PM	#3
Woodchiper Getting Wild Join Date: Mar 2011 Location: Beech Grove In. Posts: 91	Re: EZ GO canopy top on my club car? I wouldn't use PVC due to it will break as it ages. Get some 1/2 square steel tubing and hope you got a bender or take it to a shop to bend. Welding the truns is not a bad ideal

03-19-2011, 05:08 PM	#4
carryalltwo Not Yet Wild Join Date: Dec 2010 Posts: 7	Re: EZ GO canopy top on my club car? I have a cc that I bought with an EZ Go top that was not installed. The local cart shop took it in as trade in for the correct one. I wanted to make my own frame but did not have the tools to do it the way that i wanted. If you do bend your own frame, diamond plate would make a cool roof.
carryalltwo Not Yet Wild Join Date: Dec 2010 Posts: 7

Similar Threads
Thread	Forum
Club Canopy FS	Golf Carts and Parts
club car extended canopy top	Golf Carts and Parts
Needing new canopy for 1996 electric Club Car	Electric Club Car
2000.5 and up club car canopy	Golf Carts and Parts
W/t/b Used Canopy	Golf Carts and Parts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum