|
|
|||||||
| Gas Club Car Gas DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
04-11-2012, 08:57 PM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2009
Location: League City, TX.
Posts: 57
|
FE350 intake and exhaust push rods
First time I've had a head off of a Club Car Precedent with the FE350 engine in it and I noticed the push rods are different, the exhaust is straight and the intake has a dog leg in it. The intake push rod doesn't look like it is bent but is not straight. I originally took the head off because the intake valve was sticking due to a tank of bad gas, lots of gunk build up! So the question is: are the intake and exhaust push rods shaped the same? Are they both straight or does the intake push rod have a bend or s shape in it? Any help would be greatly appreciated!
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-13-2012, 08:07 PM
|
#2 |
|
Gone Wild
Join Date: Dec 2007
Location: SE Indiana
Posts: 392
|
Re: FE350 intake and exhaust push rods
straight as an arrow
|
|
|
|
|
04-13-2012, 08:33 PM
|
#3 |
|
Gone Wild
Join Date: Oct 2009
Location: Lee County, Georgia
Posts: 521
|
Re: FE350 intake and exhaust push rods
Both push rods share the same part number. Straight as an arrow.
|
|
|
|
|
04-13-2012, 08:36 PM
|
#4 |
|
Not Yet Wild
Join Date: Feb 2009
Location: League City, TX.
Posts: 57
|
Re: FE350 intake and exhaust push rods
No wonder the darn thing won't run right! Thanks for the replies! I appreciate it!
 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| For sale FE350 with clutch, carb, and exhaust | Golf Carts and Parts | |||
| Pricing for a complete and running FE350 with carb, exhaust, starter/gen, and clutch? | Gas Club Car | |||
| Pricing for a complete running FE350 with carb, exhaust, starter/gen, and clutch. | Golf Carts and Parts | |||
| G1 Blaster Intake/Exhaust | Gas Yamaha | |||
| new exhaust and intake installed on 24hp honda | Gas EZGO | |||
Linear Mode
