lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-15-2012, 04:31 PM   #1
localsmokey55
Not Yet Wild
 
localsmokey55's Avatar
E-Z-GO
 
Join Date: May 2012
Posts: 7
Angry Shifter FNR experise needed.

Purchased this "huntin" vehicle from some young good ol boys. They have it Baja style and cammo of course. 95 Meadlist 4stroke Robin. To shift it to go you have to open the seat and manually pull the engagement lever to desired position...yeah, good ol boy's. Anyway, I purchased both cables, springs, washers, yadda-yadda (Sticker shock...yes!!!) Is there any tricks I should know before assembling. I already dropped the skid plate and removed both broken cable(s). Does that little indicator have to be in a certain position prior to assembly? 1 and 3/8" correct spring compression at the tranny? Need your "been there-done that" expertise anybody???. Thanks Bob
localsmokey55 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-15-2012, 06:26 PM   #2
localsmokey55
Not Yet Wild
 
localsmokey55's Avatar
E-Z-GO
 
Join Date: May 2012
Posts: 7
Default Re: Shifter FNR experise needed.

Any tricks to know about replacing the throttle cable (since the old one is baling wired in place) This is a underside project I assume??? Still needing advice guy's...Thanks
localsmokey55 is offline   Reply With Quote
Old 05-15-2012, 07:36 PM   #3
scottyb
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 70,660
Default Re: Shifter FNR experise needed.

It's pretty straight forward. 1 3/8ths is a good starting point but I have seen em working good 1/4" + or -.
Hope this helps.
scottyb is offline   Reply With Quote
Old 05-17-2012, 05:20 AM   #4
Doc's BoneCracker
Gone Wild
 
Doc's BoneCracker's Avatar
E-Z-GO
 
Join Date: Jan 2012
Location: Kansas City, Mo
Posts: 544
Default Re: Shifter FNR experise needed.

I agree with Scottyb Start with that setting and start with the selector in N you may have to switch back and forth to get it on but make adjustments in neutral
Doc's BoneCracker is offline   Reply With Quote
Old 05-17-2012, 10:39 AM   #5
localsmokey55
Not Yet Wild
 
localsmokey55's Avatar
E-Z-GO
 
Join Date: May 2012
Posts: 7
Default Re: Shifter FNR experise needed.

Thank you guys! I have it adjusted a little "under" and it seems to work but a little hesitant, have to give it a little throttle to engage at first.
localsmokey55 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Convert dual cable shifter to single cable shifter? Gas EZGO
Shifter handle Members Rides
fwd/rev shifter Electric EZGO
Shifter Gas Club Car
New shifter Gas Club Car


All times are GMT -5. The time now is 11:31 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.