|
06-12-2014, 04:21 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2014
Posts: 7
|
Jacobsen 1110 Hauler
I just bought two Jacobsen 1110 Haulers. I would like to lift them so I can put larger tires under them. They are both 1997 models. The front axles appear to be identical, but the back axle mounting method is different between the two Haulers. One has a welded plate that is bolted to the spring. The other has what appears to be a aluminum housing that has a rubber bushing. I would like to lift up about 5". Any help would be greatly appreciated.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-13-2014, 08:32 AM
|
#2 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: Jacobsen 1110 Hauler
One way to do it..
The bottom plate, also the square tubing has to have holes in the middle to accept the alignment pin on the axle and alignment pin on the spring.. You will also need to trim the rubber bushing to clear the axle pin when you flip the housing, I do it with a bench grinder.  |
|
|
|
|
06-13-2014, 03:59 PM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2014
Posts: 7
|
Re: Jacobsen 1110 Hauler
Thanks for the help and pictures. What brand of lift kit did you use? I can only find Jakes brand from my limited search. Any thoughts on Jakes brand?
|
|
|
|
|
06-13-2014, 04:11 PM
|
#4 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: Jacobsen 1110 Hauler
Not familiar with the 1110 Hauler, is the steering bolted on a plate welded to top of the front axle or on the firewall?
|
|
|
|
|
06-13-2014, 06:10 PM
|
#5 |
|
Not Yet Wild
Join Date: Jun 2014
Posts: 7
|
Re: Jacobsen 1110 Hauler
I will take pictures and send to you. Thanks in advance for your help. by the way, sweet rides you have.
|
|
|
|
|
06-16-2014, 05:20 PM
|
#6 |
|
Not Yet Wild
Join Date: Jun 2014
Posts: 7
|
Re: Jacobsen 1110 Hauler
Both are connected to firewall.
|
|
|
|
|
06-16-2014, 07:21 PM
|
#7 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: Jacobsen 1110 Hauler
Edit: Sorry
I just looked at jake's site, forget the above and go with the Jake's This one for the one with aluminum brackets on the back..(toss the brackets) http://www.jakesliftkits.com/liftkit...-94-011-2/6202 this one for the one with the welded plates on the axle... http://www.jakesliftkits.com/liftkit...gas-94-00/6215 |
|
|
|
|
06-17-2014, 04:38 PM
|
#8 |
|
Not Yet Wild
Join Date: Jun 2014
Posts: 7
|
Re: Jacobsen 1110 Hauler
You have been a big help. Will send you pictures once I get everything done.
 |
|
|
|
|
06-17-2014, 04:54 PM
|
#9 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: Jacobsen 1110 Hauler
No problem, looking forward to the pictures.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| What year is my Jacobsen 1110 Hauler | Gas EZGO | |||
| Jacobsen 1110 hauler (Ezgo Workhorse) | Golf Carts and Parts | |||
Linear Mode
