|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-28-2014, 09:50 AM | #1 |
Gone Wild
Join Date: Mar 2014
Location: S.W. Florida
Posts: 302
|
input shaft replacement
is their any step by step instructions on replacing the input shaft on a g16? whell im not doing the shaft but just the 2 bearings oil seal & case gasket. need help on the disassembly part. do I need to remove the detent ball-spring-bolt. how do I get it back to the correct setting?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-28-2014, 10:19 AM | #2 | ||
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: input shaft replacement
I haven't seen a step by step about this, but when you do it , make a step by step with pics for others. and to answer your question about the ball spring and bolt, the answer to that is in your other thread about this
http://www.buggiesgonewild.com/gas-y...ml#post1042962 Quote:
Quote:
|
||
06-28-2014, 11:19 AM | #3 | |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: input shaft replacement
Quote:
http://www.buggiesgonewild.com/gas-y...placement.html Don't know how to remove the inside bearing. I don't think they go bad often. The bearing in the case, yes. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G16 input shaft replacement | Gas Yamaha | |||
EZGO Input shaft seal replacement | Electric EZGO | |||
Transmission Input Shaft Replacement | Gas Yamaha | |||
2001 TXT Input Shaft Replacement | Electric EZGO | |||
Input shaft replacement | Electric EZGO |