Controller

[Sir Nuke]

Originally Posted by Naturile

Scotty where does the cable from f/r switch in diagram does it go across m- or does it connect to m-, and then go to the pos or neg on selonoid? I'm an idiot at wiring I marked the cables but this cart has so many wires going everywhere? I got the spam 48500 from you just haven't had much time to work on it Thanks so muchhelp:

Naturile.....you are confused I know.....I too have a series cart....AND I am running the SPM 485000. just so we are clear. looking at your F&R switch....you have 4 cables going to/from it. The one that's on the bottom of the switch goes to the B+, and then a cable from the B+ to the POS(+) side of the solenoid (the side that the little red wires go to). the other 3 cables go to the motor.

[Naturile]

Thanks so much, looking at the wiring diagram it looks like it jumps the controller.

[yurtle]

Originally Posted by Sir Nuke

Naturile.....you are confused I know.....I too have a series cart....AND I am running the SPM 485000. just so we are clear. looking at your F&R switch....you have 4 cables going to/from it. The one that's on the bottom of the switch goes to the B+, and then a cable from the B+ to the POS(+) side of the solenoid (the side that the little red wires go to). the other 3 cables go to the motor.

Hah! I didn't know what you meant when you said you had a SPAM (SPM).

[Naturile]

That's how these stupid computers do!

[yurtle]

Auto spell correct has made me look dumb more than once. Most times you know the intent, by the posts, but at times, the complete meaning is lost.

I had to be REAL careful at my last job, when typing memos.