Xct400 fault code- motor feild failure?

[yannicksjh]

Hi guys, just installed my new xct400 and its giving me motor feild failure fault code (1 green 5 red). I double and triple checked all wiring. Selenoid clicks then gives fault code.

Thanks in advance

[Sergio]

Disconnect one of the field wires and see if You still have the error code.

Measure the resistance of the motor field while the wire is disconnected, it should be between 1Ω-2Ω, if You get 0Ω, You have a short.

[yannicksjh]

Getting 1.2 accross F1-F2. I talk to alltrax and he said to send the new controller in after we did some testing.

Thanks