|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-21-2017, 10:42 AM | #1 |
Not Yet Wild
Join Date: Jun 2016
Posts: 71
|
Yamaha g22 Camber problems!
I'm working on a Yamaha G 22 6 seater ,the tops of the tires are leaning in, replaced shocks, and knuckle arms,when you jack up the front of the cart and let it down the alignment is perfect until you turn the steering wheel back-and-forth and it squats down until the shocks bottom out, is there another problem or did I buy Defective new shocks?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-21-2017, 04:30 PM | #2 | |
Gone Wild
Join Date: Nov 2012
Location: Southeastern Pa.
Posts: 317
|
Re: Yamaha g22 Camber problems!
Quote:
|
|
08-21-2017, 05:23 PM | #3 |
Not Yet Wild
Join Date: Jun 2016
Posts: 71
|
Re: Yamaha g22 Camber problems!
I replaced the whole assembly coil and the shock, the shock it self is bottoming out, is it supposed too?
|
08-21-2017, 08:26 PM | #4 |
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: Yamaha g22 Camber problems!
If you didn't use OEM shocks, that's going to be your issue. To make the big carts work correct, its takes the correct shock.
|
08-22-2017, 06:50 AM | #5 |
Gone Wild
Join Date: Dec 2010
Location: Woodstock,GA
Posts: 1,088
|
Re: Yamaha g22 Camber problems!
If the shocks are bottomed out they are the wrong !!!!! Too weak
Are the coils adjustable ?? |
08-22-2017, 06:59 AM | #6 |
Gone Wild
Join Date: Jun 2011
Location: Northern Indiana
Posts: 2,813
|
Re: Yamaha g22 Camber problems!
Is it possible the shocks you got were for the "standard" G-22? The 6 place stretch has to weigh more. Also, if the toe is out far enough they could work their way out like that as you roll, don't know if just turning side to side while stationary would be enough to do it too - but it might.
|
08-22-2017, 09:08 AM | #7 |
Not Yet Wild
Join Date: Jun 2016
Posts: 71
|
Re: Yamaha g22 Camber problems!
Yeah It's a OEM strut assy, kinda wondered that also about it being to heavy but I've never ran into that problem when I stretch carts but I've never done a g22 , I don't know if they make heavy duty struts for the front tho.
|
01-12-2018, 12:12 PM | #8 |
Not Yet Wild
Join Date: Jun 2016
Posts: 71
|
Re: Yamaha g22 Camber problems!
Anyone know how to stiffen up the springs, I was thinking like a spacer or somthing?
|
01-12-2018, 04:48 PM | #9 |
Gone Wild
Join Date: Nov 2011
Posts: 232
|
Re: Yamaha g22 Camber problems!
I shim mine to get the ride I want.
|
01-13-2018, 10:51 AM | #10 |
Gone Wild
Join Date: Aug 2014
Location: Texas
Posts: 250
|
Re: Yamaha g22 Camber problems!
Here is a link to a post on how I stiffened up the front springs on my G29 cart.
http://www.buggiesgonewild.com/gas-y...ml#post1062237 |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G29 with 6" Jakes has bad camber issues | Lifted Golf Carts | |||
My fix for yamaha G16 camber issue | Lifted Golf Carts | |||
RHOX 6" spendal lift camber problems | Lifted Golf Carts | |||
Caster and Camber 08 yamaha drive? | Electric Yamaha | |||
Camber issues 08 yamaha drive????? | Lifted Golf Carts |