|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-05-2018, 03:04 PM | #1 |
Not Yet Wild
Join Date: Apr 2018
Posts: 26
|
new obc, cart will charge, but wont move
replace obc, because old one wouldn't let us charge battery, now cart wont run unless we bypass obc
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-05-2018, 03:59 PM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: new obc, cart will charge, but wont move
What's the serial number of your car?
What's the drive system of your car? If Sepex, which version? See link below to identify it. https://www.revolutiongolfcars.com/d...identification What's the factory part number for the OBC that you installed? |
05-06-2018, 05:29 PM | #3 |
Not Yet Wild
Join Date: Apr 2018
Posts: 26
|
Re: new obc, cart will charge, but wont move
serial number is a9746-622649, it also a series golf cart
|
05-06-2018, 06:33 PM | #4 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: new obc, cart will charge, but wont move
He needs the factory part # for the OBC you installed so he can look it up and see if it is correct for your application. It is usually on the white sticker that is on the OBC and it would have been on the bag it came in.
|
05-06-2018, 09:35 PM | #5 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: new obc, cart will charge, but wont move
Nolefan is correct. If it's a flush mount OBC it should be 101909901. If it's an angle mount OBC, it should be 101800606. A 1997 could use either style. They're the same OBC, they just mount differently. 1997 was the year they transitioned from angle mount to flush mount.
|
05-08-2018, 11:26 AM | #6 |
Not Yet Wild
Join Date: Apr 2018
Posts: 26
|
Re: new obc, cart will charge, but wont move
it has the angle mounted bracket, i think it 101800606
|
05-08-2018, 11:34 AM | #7 |
Not Yet Wild
Join Date: Apr 2018
Posts: 26
|
Re: new obc, cart will charge, but wont move
obc kit we got is made for powerdrive and powerdrive plus models, i have a regular powerdrive model
|
05-08-2018, 07:58 PM | #8 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: new obc, cart will charge, but wont move
101800606 is the correct OBC. It's for the PowerDrive car only. The PowerDrive plus car uses a 101800608. I know it doesn't run, bus does the cart charge? If the cart charges and you connected the small yellow wire to the negative side of the solenoid coil, then you obviously have an internal issue in the OBC that is keeping it from supplying negative power to the solenoid. It may be a defective unit.
|
05-08-2018, 09:44 PM | #9 |
Not Yet Wild
Join Date: Apr 2018
Posts: 26
|
Re: new obc, cart will charge, but wont move
It does charge
|
05-08-2018, 10:20 PM | #10 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: new obc, cart will charge, but wont move
|
|
|
Similar Threads | ||||
Thread | Forum | |||
96 club car ds solenoid wont click and cart wont move unless you jump solenoid | Electric Club Car | |||
2004 Club Car DS wont charge or move | Electric Club Car | |||
EZ go shuttle wont move on full charge | Electric EZGO | |||
Cart wont move or charge | Electric EZGO | |||
cart wont move | Electric EZGO |