looking for digital in-dash battery gauge

[lvandyke]

instead of a vertical bar scale with percent for State of Charge- I wonder if they make a digital volt readout? I want to see the actual battery voltage as I drive.
is that possible? I have 2001 TXT Shuttle 2+2 PDS 36v.
haven't seen it on many sponsor sites I checked.
Thanks in advance

[BigOL3]

Check ScottyB, he sells them.

[BigOL3]

http://www.cartsunlimited.net/battery-meters.html

http://nebula.wsimg.com/019e833096b3...&alloworigin=1

[lvandyke]

thanks, bought one.

[DrLove38]

I bought one and the 3 hole stainless steel plate so you can mount it right beside your F/R switch.
Pretty cool.

[ggroff]

I have one, it's nice and bright. Display stays on all the time, but current draw is practically nothing.

[lvandyke]

So I bought 2 hole plate and digital volt meter- jumpered to key switch for on/off control of meter- worked fine for testing, put it all together in dash- nothing. key switch seems dead, f/r switch silent, then noticed I did not put in tow before working. is key switch fried? did I toast the cart? about to order new key switch. battery reads 36.7volts at terminals of all six combined. took off cover on charger port- reads 36.7 and looks good. oh...and now I have it in tow/maintenance. 36v TXT/PDS

[70oldsracer]

Originally Posted by ggroff

I have one, it's nice and bright. Display stays on all the time, but current draw is practically nothing.

I see all the stickers, has to be a race car somewhere

[ggroff]

Originally Posted by 70oldsracer

I see all the stickers, has to be a race car somewhere

Some are from a 454 build I did, but most are from car shows. Stickers are covering lots of ugly that was a byproduct of the removal of previous owner's business logos.

[orangeman6]

Originally Posted by lvandyke

So I bought 2 hole plate and digital volt meter- jumpered to key switch for on/off control of meter- worked fine for testing, put it all together in dash- nothing. key switch seems dead, f/r switch silent, then noticed I did not put in tow before working. is key switch fried? did I toast the cart? about to order new key switch. battery reads 36.7volts at terminals of all six combined. took off cover on charger port- reads 36.7 and looks good. oh...and now I have it in tow/maintenance. 36v TXT/PDS

Wait for some help before you start ordering stuff. Do you have pack voltage into the key switch but not out? You need the wiring diagram for your cart and to start tracing pack voltage. I think the diagram should be in the stickies.