|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-14-2020, 11:52 AM | #1 |
Not Yet Wild
Join Date: Jun 2020
Posts: 4
|
Extended Ball Joint for RXV
I recently installed a SGC 6" lift kit and after setting my camber, my ball joints are screwed as far out as I dare go in order to get toe in/out corrected. Do they make a longer ball joint that will allow me to extend them out? If so, where can they be bought, I have searched for a couple days now but cannot seem to find them.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-14-2020, 07:19 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Extended Ball Joint for RXV
Never heard of the part your looking for.
(Just so you dont think "26 people looked, and not a single response") |
06-14-2020, 07:30 PM | #3 |
Not Yet Wild
Join Date: Jun 2020
Posts: 4
|
Re: Extended Ball Joint for RXV
This is the steering tie rod, also known as the ball joint. This part adjusts your toe in/out. When I look them up some people call them tie rods, some call them ball joints, technical term is rod end. See attached photo.
|
06-14-2020, 07:32 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Extended Ball Joint for RXV
I knew exactly what you were asking for, but never seen a longer version.
|
06-14-2020, 07:48 PM | #5 |
Not Yet Wild
Join Date: Jun 2020
Posts: 4
|
Re: Extended Ball Joint for RXV
I am shocked this not available, I still need to adjust my camber by 1/2” on each tire which will throw my toe in / out way off and there isn’t enough adjustment in my rod end, I figured this would be a common issue with these lift kits. I left a message for the manufacturer but they have been less than desirable in responding to any messages.
|
06-16-2020, 09:34 AM | #6 |
Not Yet Wild
Join Date: Jun 2020
Posts: 4
|
Re: Extended Ball Joint for RXV
Updated: With this being the first lift kit I have ever installed on a golf cart,I started looking this lift kit over in detail. It is apparent that the spindle brackets that came with the lift kit which hold the A-Arm bracket have far too much play in them, the spindle bracket at the A-Arm can move side to side by a good 1/4". I picked up some shims and that helped align everything. 1/4" at the A-Arm translated to a good 1/2" or better at the tire and rod end.
|
Tags |
extended ball joint |
|
|
Similar Threads | ||||
Thread | Forum | |||
best way to reconnect tie rod ball joint? | Electric EZGO | |||
91' Par Car ball cups/ Ball joint ends??? | Columbia ParCar | |||
WTB Ball Joint SPACERS ? | Golf Carts and Parts | |||
ball joint question? | Electric EZGO | |||
Tie Rod ball joint help | Lifted Golf Carts |