Forward reverse hookup

[Blacksheepkustoms]

So, I have a cart in my shop thatis a 2000 model series model with manual f/r lever. When I try to find wiring diagram for the f/r switch , everything tells me that A2 on the motor is top left of the motor and A1 is down left. My motor has stickers on it , and are opposite . the A2 is down left on the motor. S1 and S2 are also backwards from everything I see on the internet, and here. So, what do I have here?
1215200811.jpg

[rockfordpi]

Originally Posted by Blacksheepkustoms

So, I have a cart in my shop thatis a 2000 model series model with manual f/r lever. When I try to find wiring diagram for the f/r switch , everything tells me that A2 on the motor is top left of the motor and A1 is down left. My motor has stickers on it , and are opposite . the A2 is down left on the motor. S1 and S2 are also backwards from everything I see on the internet, and here. So, what do I have here?
Attachment 213377

Does not matter the location on the motor as long as you go to the same labeled terminal on the F/R switch.

Also, it does not matter if you reverse A1 and A2 and/or S1 and S2, the worst that can happen is that the motor would run the opposite direction from the switch. Just don't cross the A's and S's.

[Blacksheepkustoms]

Yep, we found out we had them hooked up correctly. Thanks