|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
10-28-2021, 04:59 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2020
Location: Destin, FL
Posts: 35
|
Pot box question
I just tested the potentiometer on my '92 EZGO Marathon. With the pedal fully depressed it reads just over 8K ohms. It should top out at 5K. I know a little slack is acceptable but how much is too much?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-28-2021, 06:06 PM
|
#2 |
|
Techno-Nerd
 Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Pot box question
Some controllers shut down when they see more than about 7kΩ. The Curtis 1204 used in Marathons is one of those.
Try to adjust it down to no more than 6kΩ. |
|
|
|
|
10-29-2021, 12:53 PM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2020
Location: Destin, FL
Posts: 35
|
Re: Pot box question
I replaced the stock controller with an Alltrax 48500 last year when I upgraded to 48v. Not sure what the max tolerance is for that, but I figured out a solution. Rather than take the pot box apart and try to adjust it internally, I replaced the linkage to the pedal with a longer bolt. Now it maxes out at 5.8k with the pedal to the floor.
  |
|
|
|
|
10-29-2021, 01:19 PM
|
#4 |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Pot box question
 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Where does this vacuum hose go? And carb question and gas tank question | Gas Yamaha | |||
| Upgrade question.. I am upgrading my cart and have a question on a part. | Electric Club Car | |||
| 1990 Club car With flat head Rev limiter question and govenor question | Gas Club Car | |||
Linear Mode
