|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-29-2012, 01:41 PM | #1 |
Not Yet Wild
Join Date: Oct 2012
Location: Nova Scotia, Canada
Posts: 10
|
Installing lights on a 48v Precedent..
I just recieved a headlight & taillight kit, and I am trying to install it on my 2007 48v precedent.
I have installed the headlight and taillights (easy), but the wiring at the dash worries me. The harness has unused plugs and wires on it, and the instructions mention a 12v reducer... Any you tube tutorials, etc just show: hooking up the fused blue wire in the battery compartment, and connecting the wires under the dash.. Do I need a 12v reducer with this kit? Look at the picture and see the unused wires.. (the light switch is in the picture too..) I have already plugged in the headlights, and connected the main wiring harness. This is a third plug on the supplied harness. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-29-2012, 03:55 PM | #2 |
Not Yet Wild
Join Date: Oct 2012
Location: Nova Scotia, Canada
Posts: 10
|
Re: Installing lights on a 48v Precedent..
I figured it out. the green & orange wires are for the front signal lights, and tyhe rest must be for a horn, etc...
|
11-03-2012, 09:11 PM | #3 |
Getting Wild
Join Date: Aug 2011
Location: Western Michigan
Posts: 87
|
Re: Installing lights on a 48v Precedent..
You did figure it out....
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Installing led lights and horn | Gas Club Car | |||
Installing Club Car LIGHTS--2007 PRECEDENT | Electric Club Car | |||
Installing a radio and lights | Electric EZGO | |||
installing lights | Electric Club Car | |||
97 club car installing lights | Electric Club Car |