Old EZGO

dadler · 02-20-2015, 01:37 PM

I have a old ezgo Medalist. I replaced 3 of the batteries and one of them was installed the wrong way. I have fixed that and replaced the solenoid. It will not move. What should I check for od replace? Thank you for your help.

scottyb · 02-20-2015, 01:43 PM

Welcome to BGW
The last 2 digits of the manufacture code is the year the cart was made?
Do you know if it is a resistor coil or solid state drive?

Once we have this info we can post the correct diagram and offer guidance

dadler · 02-20-2015, 05:31 PM

the last 2 digits are 94

resistor coil or solid state drive? what do I look at to know which I have?

dadler · 02-27-2015, 11:41 AM

the last 2 digits are 94

resistor coil or solid state drive? what do I look at to know which I have?

Any help would be appreciated, thanks!

CCFanatic · 02-27-2015, 02:06 PM

Quote:

Originally Posted by dadler

the last 2 digits are 94

resistor coil or solid state drive? what do I look at to know which I have?

Any help would be appreciated, thanks!

Medalists only had solid state drive systems - better known as controller drive systems

dadler · 03-02-2015, 08:42 AM

I have a old ezgo Medalist. I replaced 3 of the batteries and one of them was installed the wrong way. I have fixed that and replaced the solenoid. It will not move.

Can you tell me the progression I should go through to troubleshoot why it will not move?

Thanks

rib33024 · 03-02-2015, 01:26 PM

Welcome to BGW

Is there a TOW/RUN switch on top of the controller cover. it's a black plastic cover under the seat on the passenger side of the cart

dadler · 03-03-2015, 07:40 AM

Thank you for the reply, the cart is at my house in Northern MI and I will not be there until Thursday. Please look for an answer from me then.

Thanks again.

dadler · 03-06-2015, 01:51 PM

There is no TOW/RUN switch. The plastic cover is just a cover. under that is a black box with the solenoid in front of it. I replaced the Solenoid not sure what to check next. The batteries are charged.

dadler · 03-12-2015, 10:41 AM

There is no TOW/RUN switch. The plastic cover is just a cover. under that is a black box with the solenoid in front of it. I replaced the Solenoid not sure what to check next. The batteries are charged.

02-20-2015, 01:37 PM	#1
dadler Not Yet Wild Join Date: Feb 2015 Posts: 13	Old EZGO I have a old ezgo Medalist. I replaced 3 of the batteries and one of them was installed the wrong way. I have fixed that and replaced the solenoid. It will not move. What should I check for od replace? Thank you for your help.
dadler Not Yet Wild Join Date: Feb 2015 Posts: 13

02-20-2015, 01:43 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: Old EZGO Welcome to BGW The last 2 digits of the manufacture code is the year the cart was made? Do you know if it is a resistor coil or solid state drive? Once we have this info we can post the correct diagram and offer guidance

02-20-2015, 05:31 PM	#3
dadler Not Yet Wild Join Date: Feb 2015 Posts: 13	Re: Old EZGO the last 2 digits are 94 resistor coil or solid state drive? what do I look at to know which I have?
dadler Not Yet Wild Join Date: Feb 2015 Posts: 13

02-27-2015, 11:41 AM	#4
dadler Not Yet Wild Join Date: Feb 2015 Posts: 13	Re: Old EZGO the last 2 digits are 94 resistor coil or solid state drive? what do I look at to know which I have? Any help would be appreciated, thanks!
dadler Not Yet Wild Join Date: Feb 2015 Posts: 13

03-02-2015, 08:42 AM	#6
dadler Not Yet Wild Join Date: Feb 2015 Posts: 13	Re: Old EZGO I have a old ezgo Medalist. I replaced 3 of the batteries and one of them was installed the wrong way. I have fixed that and replaced the solenoid. It will not move. Can you tell me the progression I should go through to troubleshoot why it will not move? Thanks
dadler Not Yet Wild Join Date: Feb 2015 Posts: 13

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-02-2015, 01:26 PM	#7
rib33024 ...................... Join Date: Apr 2009 Location: FT Lauderdale FL. Posts: 16,416	Re: Old EZGO Welcome to BGW Is there a TOW/RUN switch on top of the controller cover. it's a black plastic cover under the seat on the passenger side of the cart

03-03-2015, 07:40 AM	#8
dadler Not Yet Wild Join Date: Feb 2015 Posts: 13	Re: Old EZGO Thank you for the reply, the cart is at my house in Northern MI and I will not be there until Thursday. Please look for an answer from me then. Thanks again.
dadler Not Yet Wild Join Date: Feb 2015 Posts: 13

03-06-2015, 01:51 PM	#9
dadler Not Yet Wild Join Date: Feb 2015 Posts: 13	Re: Old EZGO There is no TOW/RUN switch. The plastic cover is just a cover. under that is a black box with the solenoid in front of it. I replaced the Solenoid not sure what to check next. The batteries are charged.
dadler Not Yet Wild Join Date: Feb 2015 Posts: 13

03-12-2015, 10:41 AM	#10
dadler Not Yet Wild Join Date: Feb 2015 Posts: 13	Re: Old EZGO There is no TOW/RUN switch. The plastic cover is just a cover. under that is a black box with the solenoid in front of it. I replaced the Solenoid not sure what to check next. The batteries are charged.
dadler Not Yet Wild Join Date: Feb 2015 Posts: 13