|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-19-2015, 05:44 PM | #11 |
Getting Wild
Join Date: Aug 2013
Location: North East Georgia
Posts: 108
|
Re: Installing Key for On/Off switch
I've been thinking about trying to put a push button start on mine. Anybody done something like that before?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-21-2015, 09:46 PM | #12 |
Not Yet Wild
Join Date: Mar 2014
Location: Puyallup, WA
Posts: 23
|
Re: Installing Key for On/Off switch
there was never a key switch. I do not see it anywhere so I'm assuming there isn't one. Sorry for not explaining this right, I should be more descriptive when I'm asking for your help...Thanks again.
|
04-22-2015, 07:22 AM | #13 |
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: Installing Key for On/Off switch
The original key switch would have been by your right knee next to the F/R selector. If the key switch has been removed by someone there would be a hole in the body there now.
Look right behind the hole and see if there are two small wires twisted together. They would probably have different color jackets. In the picture, if you look right next to the back of the F/R switch you will see a small blue and a small yellow wire with spade connectors. These are the wires hooked to the key switch. The cart in the picture is a '91 and a resistor cart. Yours being a '92 is likely a controller cart so the wiring will be a little different but the key switch would have been in the same place. If it were me, I would be concerned about why the key switch was bypassed. I would obtain a wiring diagram for that particular cart and go through the entire thing. Key switches are cheap and ezgo keys are universal. You could go with a unique key switch if desired. |
05-01-2015, 02:53 PM | #14 |
Not Yet Wild
Join Date: Mar 2014
Location: Puyallup, WA
Posts: 23
|
Re: Installing Key for On/Off switch
Thanks a lot, you were right on!!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Installing key switch in new CC DS dash | Electric Club Car | |||
Looking at installing a pds speed and torque switch? | Electric EZGO | |||
Installing new f&r switch | Electric EZGO | |||
Installing forward reverse switch 1993 | Electric Club Car | |||
gas club car, won't crank after installing light switch | Gas Club Car |