|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-13-2017, 01:45 PM | #1 |
Gone Wild
Join Date: Apr 2014
Posts: 407
|
MCOR questions and understanding
Measured both of my MCOR's that I have out of the cart and this is what I found for my resistance measurements.
Just for my reference is the Controller looking for 5KΩ-0 and closer to 0Ω the better off I am? Or is the controller only looking for a 5KΩ difference? If the Ω In test 1) there is 5311Ω Difference from pedal up to pedal down. Is that all it is looking for? Would I see more speed if the controller was actually seeing closer to 0Ω when pedal is down instead 1000Ω? thank you for any information. MCOR #1 Pedal up 6.29 KΩ Pedal Down .979 KΩ MCOR #2 Pedal up 7.55 KΩ Pedal Down 1.073 KΩ |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-13-2017, 03:46 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: MCOR questions and understanding
MCOR 1 is normal and fine.
MCOR 2 is wacked ( too high or atleast at the upper limits) |
10-16-2017, 05:40 AM | #3 |
Gone Wild
Join Date: Apr 2014
Posts: 407
|
Re: MCOR questions and understanding
thanks
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Understanding solenoids | Electric EZGO | |||
MCOR Repair and troubleshooting questions | Electric Club Car | |||
Understanding Regen | Electric Club Car | |||
Club Car MCOR II to MCOR 4 Upgrade - Removing Pivot Rod? | Electric Club Car |