|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-23-2017, 02:25 PM | #1 |
Not Yet Wild
Join Date: Oct 2017
Location: Georgia
Posts: 1
|
2006 presedent no movement
My 2006 president will not go sr#PQ0642-696002. The positive was loose and melted one of the terminals. I fixed that and charged the battery pack (4), I have 48.9 volts. I can hear the solenoid click in and out when pedal pressed but it seems to read 48 on line and load all the time on the solenoid. I checked my controller with a meter and from neg. to B+ it goes to 0 when pedal is pressed. My ? is if the contacts on the solenoid are stuck closed will this make the obc lockout and should I try and bypass after I change solenoid. it is stock all but 20in wheels but that shouldn't make a difference. is there anything else I can check, on my next day off I planned on ohming out the motor to rule that out. thanks for taking the time to help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2006 Presedent | Gas Club Car | |||
09 presedent 48volt trade for gas ds or presedent | Golf Carts and Parts | |||
2006 click but no movement | Electric EZGO | |||
2006 Presedent speed (I am new to the golf carts) | Electric Club Car | |||
Toe in 2006 Presedent | Electric Club Car |