|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
05-16-2007, 08:18 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2006
Location: So. Ohio
Posts: 24
|
MAIN JETS
Hello all,
Does anyone know if Mikuni main jets will fit a stock G2 carb? If so, what Mikuni size would correspond to a .046" hole? If Mikuni jets won't fit, what will? This is for a stock G2 motor with a K&N filter. I've been told that .046" is the size to use, which I'm also told is a #56 drill bit. Suggestions? Thanks!! Mike (BB) |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-16-2007, 08:34 PM
|
#2 |
|
Admin/Moderator
 Join Date: Dec 2006
Location: Ohio
Posts: 18,042
|
Hi Mike!! Check this out.
[url]http://cartpartsplus.com/product_info.php?products_id=239&osCsid=5e4e2363f1 d3f093d37e27e00a3f95c7 |
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
05-16-2007, 08:45 PM
|
#3 |
|
Not Yet Wild
Join Date: Dec 2006
Location: So. Ohio
Posts: 24
|
Hi T.N.G.,
I checked out the link. I wonder what size that jet is, it doesn't say. |
|
|
|
|
05-16-2007, 08:46 PM
|
#4 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,042
|
If I'm not mistaking, Tom's jets are .048.
|
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
05-16-2007, 08:51 PM
|
#5 |
|
Not Yet Wild
Join Date: Dec 2006
Location: So. Ohio
Posts: 24
|
I e-mailed him and asked. That would be about perfect. Thanks for the tip.
|
|
|
|
Linear Mode
