![]() |
|
Electric Club Car Electric DS, and Precedent golf cars |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#11 |
Gone Wild
![]() ![]() Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
![]() This is an old thread and we have a lot more information about programming the ERIC charger since it is essentially an IC650 model.
I was going to refer to another thread but it appears Delta-Q keeps changing their site links and the links on the older thread no longer work. Here is the current links I found for installing additional charging profile/algorithm in those ERIC chargers: List of Algorithms available for download: US Batteries: https://support.delta-q.com/hc/en-us...hm-suggestions Where to Download the Algorithms: https://support.delta-q.com/hc/en-us...eries-Chargers How to Install them: https://support.delta-q.com/hc/en-us...date_steps.pdf Software needed to read the data logs from USB stick: https://delta-q.com/software-accessories/ The comment in their instructions about "Prepare a USB data Drive" simply means obtain an USB drive that is formatted for windows (FAT32). Basically if You can read the USB stick on your windows computer you are good to go, just erase the contents of the drive before copying any files or plugging it to the charger to ready the data log. |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#12 |
Gone Wild
![]() ![]() Join Date: Aug 2016
Location: Prescott, AZ At a really nice Country Cub
Posts: 242
|
![]() I have now changed my charger profile to 1 since this was an old post. The result has been good, no more excess boiling when charging.
Sent from my iPad using Tapatalk |
![]() |
![]() |
![]() |
#13 |
Getting Wild
Join Date: Dec 2018
Posts: 75
|
![]() I changed mine to 1 when I bought a new pack of 875’s, it is super easy to do and only takes 5 minutes.
|
![]() |
![]() |
![]() |
#14 |
Not Yet Wild
Join Date: Aug 2017
Posts: 45
|
![]() Any ideas on what would be required to use this newer charger on an older club car? I know this unit no longer requires the obc but is it getting any information from the cart? I have already swiched to alltrax controller and would shure like to ditch the stud setup I have going through my obc because of larger cables and my noisy power drive charger.
Thanks Bill |
![]() |
![]() |
![]() |
#15 |
Bonafide Nincompoop
![]() Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
![]() Yes, you can absolutely get rid of the OBC.
You can use ANY smart charger with your cart, just run the BLACK lead from the charge receptacle straight to the main pack negative terminal, or to the B- terminal at the controller. The GREY lead on the charge receptacle can be used for controller lockout function during charging if your controller is capable. Or it can be used for a temperature sensor input if your charger has the option. Or you can simply pull the yellow fuse holder apart and remove the fuse, and tie the grey wire out of the way, or cut it off if you don’t ever plan to use it. As far as I know, the Club Car branded ERIC Charger does not have temp sensor capability. But the Delta-Q IC650 (same platform as Eric but more fancy) does offer that capability if you have any interest in temperature compensation during charging. There are plenty of other Smart chargers on the market that will work as well. It just depends how “techy” you want to get. |
![]() |
![]() |
![]() |
#16 |
Not Yet Wild
Join Date: Aug 2017
Posts: 45
|
![]() Thanks, great info I am pretty "techy" and really cant stand the old noisy Powerdrive 1 or 2. I may look the other chargers and see what I can do with the CAN bus info they are putting out.
|
![]() |
![]() |
![]() |
#17 |
Bonafide Nincompoop
![]() Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
![]() Check out the Lester Summit II as well. That’s probably the top shelf for smart chargers right now. Bluetooth enabled with the charger connect app for your phone, and you can check stored charge data and change parameters in the charger quick and easy. No laptop or wires required to download data or change charge algorithms.
|
![]() |
![]() |
![]() |
#18 |
Getting Wild
![]() Join Date: Jul 2017
Location: Ocala Fl.
Posts: 120
|
![]() Delta q recomends algorithm 3 for trojan 875’s now
|
![]() |
![]() |
![]() |
#19 |
Not Yet Wild
![]() Join Date: Feb 2019
Location: Charleston SC
Posts: 4
|
![]() Will the stock charging profile for the ERIC charger work with Crown 165 AH 8v batteries in my 48v club car? I do not have a PC to be able to use the Delta software to change the algorithm. Thank you! Which algorithm is used from the factory? It is a 2015 ERIC Charger IC0650-048-CC
|
![]() |
![]() |
![]() |
#20 |
Not Yet Wild
Join Date: Aug 2017
Posts: 45
|
![]() Can't answer the one above but I was wondering if all CC Eric and Lester chargers are made by Delta-Q The 650 watt's all look about the same. The Lester 1050W doesn't look like it's part of the Delta-Q line.
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Forum | |||
95 CC Charger over charging batteries OBC? | Electric Club Car | |||
Charging AGM batteries with old charger | Electric Yamaha | |||
charging batteries using a 12 v charger | Electric EZGO | |||
Charger not Charging New Batteries | Electric Club Car | |||
Charging batteries with a 12v charger | Electric EZGO |