lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center
Design Center Shop tools, fabrication and Paint and Body



Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-13-2020, 07:41 AM   #1
RobotObsession17
Not Yet Wild
 
RobotObsession17's Avatar
E-Z-GO
 
Join Date: Jul 2020
Location: California, KY
Posts: 35
Default Gyroscopic drink holder

I plan to create a gyroscopic drink holder, that will automatically keep my drink level regardless of the cart's tilt (pitch and roll). I plan to attach this device on the front roof support (I think called a front roof strut, as I'm new to golf carts).

I am trying to design how the drink holder will attach to the golf cart, and need help. Ideally, I would like to create a universal mounting bracket, if possible.

EZGO Question: My 1998 front roof support is ~ 3/4" square. Did EZGO keep that same size from year to year, or does the size of the front roof support vary?

CLUB CAR Question: Any idea what size Club Car uses for their front roof supports?

Pix below to portray the concept of the drink holder.

Thanks in advance.
Attached Images
File Type: png Screen Shot 2020-09-13 at 8.04.09 AM.png (384.3 KB, 0 views)
File Type: png Screen Shot 2020-09-13 at 8.04.49 AM.png (319.9 KB, 0 views)
RobotObsession17 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 09-13-2020, 07:53 AM   #2
Swan
Cave Dweller
 
Swan's Avatar
Club Car
 
Join Date: Apr 2013
Location: Always On The Move
Posts: 22,114
Default Re: Gyroscopic drink holder

front roof support on a DS are 1" sq
Swan is offline   Reply With Quote
Old 09-13-2020, 10:31 AM   #3
Getter-Done
Getting Wild
 
Getter-Done's Avatar
E-Z-GO
 
Join Date: Sep 2020
Location: TN
Posts: 127
Default Re: Gyroscopic drink holder

I have often thought of making one of these.
This would be a great addition to a lawnmower/ tractor / and golf-cart.
Will you be making this with a milling machine and a lathe?
Or do you have a 3D printer?




.
Getter-Done is offline   Reply With Quote
Old 09-13-2020, 10:39 AM   #4
kgsc
Gone Wild
 
kgsc's Avatar
Mixed Breed
 
Join Date: Dec 2009
Location: Aiken, SC
Posts: 12,997
Default Re: Gyroscopic drink holder

Nice idea but been around a while.
Attached Images
File Type: jpg C3712BFF-191A-4D31-9800-EC8EA9BDEE64.jpg (92.6 KB, 0 views)
kgsc is offline   Reply With Quote
Old 09-13-2020, 10:40 AM   #5
Reddawg454
Grumpy Old Guy
 
Reddawg454's Avatar
Club Car
 
Join Date: Jun 2014
Location: SEMO
Posts: 2,701
Default Re: Gyroscopic drink holder

Perhaps something like this https://www.amazon.com/attwood-11672...g-goods&sr=1-6
Reddawg454 is offline   Reply With Quote
Old 09-13-2020, 10:41 AM   #6
Reddawg454
Grumpy Old Guy
 
Reddawg454's Avatar
Club Car
 
Join Date: Jun 2014
Location: SEMO
Posts: 2,701
Default Re: Gyroscopic drink holder

kgsc beat me to it lol
Reddawg454 is offline   Reply With Quote
Old 09-14-2020, 06:38 AM   #7
RobotObsession17
Not Yet Wild
 
RobotObsession17's Avatar
E-Z-GO
 
Join Date: Jul 2020
Location: California, KY
Posts: 35
Default Re: Gyroscopic drink holder

kgsc and Reddawg454 sorry for the confusion, but I am not trying to buy one, but rather build one. Even when something exists, I prefer to build my own version for some odd reason that I cannot explain LOL (drives my wife crazy).

Swan, thanks for the help - I appreciate that. As thanks - if you want one, I will happily mail one to you for the cost of shipping. No promises on quality, workmanship, interference with a windshield (I don't have one), etc.

Getter-Done (quite) a few comments:

1. That's a great idea - I may have to make another version to fit my riding lawn mower. Good thinkin'.

2. I will 3D print for sure. I did a material-properties stress-loading simulation and the plastic will be no problem to hold a 12 oz can. If I needed stronger, I could print in carbon fiber.

3. Alternatively I teach Robotics at our local University (just one class) and they have a CNC machine there if I needed to opt for aluminum.

4. I noticed you are a Machinist in your profile - I am jealous. It's amazing what you guys can crank out based on decades of experience. I rely heavily on the expertise of the local machinist at the University, he has endless tricks up his sleeve when it comes to machining a part.

5. I welcome any suggestions for improvement given your Machinist background.

Thanks again, all.
RobotObsession17 is offline   Reply With Quote
Old 09-14-2020, 07:57 AM   #8
kgsc
Gone Wild
 
kgsc's Avatar
Mixed Breed
 
Join Date: Dec 2009
Location: Aiken, SC
Posts: 12,997
Default Re: Gyroscopic drink holder

Kudos for building your own. Pretty sure that the txt line still uses 3/4” and the rxv line are either 1” or 1 1/4”. Things you might want to consider would be for maybe a 20oz yeti type cup.
kgsc is offline   Reply With Quote
Old 09-17-2020, 06:29 AM   #9
RobotObsession17
Not Yet Wild
 
RobotObsession17's Avatar
E-Z-GO
 
Join Date: Jul 2020
Location: California, KY
Posts: 35
Default Re: Gyroscopic drink holder

Quote:
Originally Posted by kgsc View Post
Kudos for building your own. Pretty sure that the txt line still uses 3/4” and the rxv line are either 1” or 1 1/4”. Things you might want to consider would be for maybe a 20oz yeti type cup.
Thanks, kgsc. Seems making a universal mount might be more challenging than I hoped. Does anyone have an RXV that can let me know if they are 1" or 1.25"?

The Yeti cup idea is brilliant. I had not thought of that. Nor do I have one, but I will track one down. Good thinkin' and thanks again.
RobotObsession17 is offline   Reply With Quote
Old 09-17-2020, 06:42 AM   #10
RobotObsession17
Not Yet Wild
 
RobotObsession17's Avatar
E-Z-GO
 
Join Date: Jul 2020
Location: California, KY
Posts: 35
Default Re: Gyroscopic drink holder

Update on this project:

Good news: I was able to get it printed and assembled.

Bad news: The mount piece failed to print, so I have to redo.

Hopefully install & test tomorrow. Here is a pic of progress:
Attached Images
File Type: png gryo.png (324.8 KB, 0 views)
RobotObsession17 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center


Thread Tools
Display Modes


Similar Threads
Thread Forum
New drink holder Gas EZGO
'Drink Holder Design Center


All times are GMT -5. The time now is 04:59 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.