small tube connected to main jet on a G16?

SIKPIPES · 04-10-2012, 08:51 AM

I purchased a power kit from buggies unlimited. It came with k&n filter spring inner sheave and belt. It comes with no new jet or a drill bit to alter the main jet. I took the main jet out to check it out and see if I dare drill it. when I screwed it out the jet has a small tube hooked to the jet?!?! How can this be drilled out. I havent seen on the forums anyone talk about this. I screwed out the entire center piece then removed the main jet from the entire piece that came out I was expecting a normal looking jet with threader outer section. But my jet has a little tube off the jet? What do I do to make this cart run right? Thanks a lot to any help given!

TheNewGuy · 04-10-2012, 01:59 PM

#11 is the main jet, I don't see a tube?

SIKPIPES · 04-10-2012, 10:15 PM

Will that explains how much I know! I took #9 out then the center screws out of that. I was was thinking that was the main jet!! im a putts! I wasnt even in the ballpark!! What exactly was I messing with? I see in the diogram #9 is the big center piece I took out then I took another smaller piece out of that.

BLES · 04-10-2012, 11:17 PM

The pieces you took out can get clogged up and cause problems, but if you're drilling something out, better stay away from that! If it's clean, just re-install it. Sorry I can't help with re-jetting or drill size info. Maybe the power kit supplier could provide that info.? Good luck.

BLES

SIKPIPES · 04-10-2012, 11:36 PM

I realize I dont want to drill that part out just wondered what that part of the carb was called

DOOmsman · 04-11-2012, 09:43 AM

I believe it is the emulsion or bleed tube that atomizes the fuel at slow venturi air flows.

TheNewGuy · 04-11-2012, 01:43 PM

9 = Main Nozzle

10 = Main Bleed Pipe

spriddle · 04-11-2012, 07:10 PM

I can't figure out what #1 is. Looks like a hanger or cable of some type.

smallblock450sl · 04-11-2012, 07:18 PM

Quote:

Originally Posted by spriddle

I can't figure out what #1 is. Looks like a hanger or cable of some type.

Sprid, sometimes your mean.

spriddle · 04-11-2012, 07:23 PM

Quote:

Originally Posted by smallblock450sl

Sprid, sometimes your mean.

I know. I'm work'n on it. Amongst other things.

Good thing I have some great (extremely patient) friends to help me.

04-10-2012, 08:51 AM	#1
SIKPIPES Not Yet Wild Join Date: Apr 2012 Posts: 3	small tube connected to main jet on a G16? I purchased a power kit from buggies unlimited. It came with k&n filter spring inner sheave and belt. It comes with no new jet or a drill bit to alter the main jet. I took the main jet out to check it out and see if I dare drill it. when I screwed it out the jet has a small tube hooked to the jet?!?! How can this be drilled out. I havent seen on the forums anyone talk about this. I screwed out the entire center piece then removed the main jet from the entire piece that came out I was expecting a normal looking jet with threader outer section. But my jet has a little tube off the jet? What do I do to make this cart run right? Thanks a lot to any help given!
SIKPIPES Not Yet Wild Join Date: Apr 2012 Posts: 3

04-10-2012, 01:59 PM	#2
TheNewGuy Admin/Moderator Join Date: Dec 2006 Location: Ohio Posts: 18,052	Re: small tube connected to main jet on a G16? #11 is the main jet, I don't see a tube?
	Ron PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project

04-10-2012, 10:15 PM	#3
SIKPIPES Not Yet Wild Join Date: Apr 2012 Posts: 3	Re: small tube connected to main jet on a G16? Will that explains how much I know! I took #9 out then the center screws out of that. I was was thinking that was the main jet!! im a putts! I wasnt even in the ballpark!! What exactly was I messing with? I see in the diogram #9 is the big center piece I took out then I took another smaller piece out of that.
SIKPIPES Not Yet Wild Join Date: Apr 2012 Posts: 3

04-10-2012, 11:17 PM	#4
BLES Not Yet Wild Join Date: Feb 2009 Location: Saskatchewan, Canada Posts: 65	Re: small tube connected to main jet on a G16? The pieces you took out can get clogged up and cause problems, but if you're drilling something out, better stay away from that! If it's clean, just re-install it. Sorry I can't help with re-jetting or drill size info. Maybe the power kit supplier could provide that info.? Good luck. BLES

04-10-2012, 11:36 PM	#5
SIKPIPES Not Yet Wild Join Date: Apr 2012 Posts: 3	Re: small tube connected to main jet on a G16? I realize I dont want to drill that part out just wondered what that part of the carb was called
SIKPIPES Not Yet Wild Join Date: Apr 2012 Posts: 3

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-11-2012, 09:43 AM	#6
DOOmsman Gone Wild Join Date: Jul 2008 Location: Reddick IL Posts: 11,220	Re: small tube connected to main jet on a G16? I believe it is the emulsion or bleed tube that atomizes the fuel at slow venturi air flows.

04-11-2012, 01:43 PM	#7
TheNewGuy Admin/Moderator Join Date: Dec 2006 Location: Ohio Posts: 18,052	Re: small tube connected to main jet on a G16? 9 = Main Nozzle 10 = Main Bleed Pipe
	Ron PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project

04-11-2012, 07:10 PM	#8
spriddle Admin Join Date: Dec 2006 Location: TN Posts: 101,868	Re: small tube connected to main jet on a G16? I can't figure out what #1 is. Looks like a hanger or cable of some type.

Similar Threads
Thread	Forum
Elcon Charger Indicating Batteries Disconnected When They Are Connected	Electric Club Car
Won't run with muffler connected	Gas EZGO
EZ-GO, will not move unless charger is connected	Electric EZGO
What needs to be connected to charge Precedent	Electric Club Car
leaving charger connected?	Electric EZGO