|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-17-2020, 11:45 AM | #1 |
Not Yet Wild
Join Date: Nov 2020
Posts: 8
|
Slop in mE29 tranaxle assembly
I have a 2008 gas ezgo with a mE29 tranaxle that jerks hard every time I shift from forward to reverse or reverse to forward. There is about 1/4 turn play in the tranaxle . I have no idea how much play there is supposed to be .
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-17-2020, 09:36 PM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,603
|
Re: Slop in mE29 tranaxle assembly
When you say there is play, where are you seeing the play?
|
11-18-2020, 02:16 PM | #3 |
Not Yet Wild
Join Date: Nov 2020
Posts: 8
|
Re: Slop in mE29 tranaxle assembly
When I Turn the Driven clutch by hand it will move about three Inches before it hits the. Gears.
|
11-18-2020, 08:05 PM | #4 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,603
|
Re: Slop in mE29 tranaxle assembly
|
11-19-2020, 10:07 AM | #5 |
Not Yet Wild
Join Date: Nov 2020
Posts: 8
|
Re: Slop in mE29 tranaxle assembly
Not sure but I think it is . It seem to be inside the rear end. Would like to find another me-29 tranaxle then rebuild this one.but can't find one anywhere.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Spindle to Front Strut assembly slop | Electric EZGO | |||
ME29 rear end | Gas EZGO | |||
Low range ME29 gears | Golf Carts and Parts | |||
me29 rearend | Gas EZGO | |||
ME29 won't go into forward | Gas EZGO |