|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-14-2015, 09:14 AM | #1 |
Not Yet Wild
Join Date: Jul 2010
Posts: 1
|
Pre MCI ignition and MCI ignition parts compatibility
I ran my 2003 TXT pre MCI engine out of oil and locked up one rod on the crankshaft...broke the rod and ruined the crank. I rebuilt a MCI engine to replace it and this is where the problems began...
It will start but not run very well, it really doesn't run well enough to say it runs. Checked and cleaned carburetor, checked timing marks, readjusted valves, checked pulsar coil resistance and replaced ignitor. At this point my question is, are the pulsar coil from the MCI engine and the ignitor from the pre MCI engine compatible? Thanks, Brandon |
|
|
Similar Threads | ||||
Thread | Forum | |||
Needing g14 ignition parts | Golf Carts and Parts | |||
missing ignition parts 93 ez go | Gas EZGO | |||
Looking for 79-81 g1 ignition parts. | Golf Carts and Parts | |||
Yamaha G9-Ignition Coil & Ignition Switch-Help | Gas Yamaha | |||
Need some ignition parts | Gas EZGO |