|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
03-28-2018, 10:20 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2018
Posts: 5
|
1981 G1 Crank seal dimensions
Was wondering if anyone has the dimensions for the crank seals on a G1 cart. Have search around and not able to find the specs. Both would be great but really need the clutch side. Outer, inner, and width.
Thanks |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-28-2018, 10:33 PM
|
#2 |
|
Not Yet Wild
Join Date: Mar 2018
Posts: 5
|
Re: 1981 G1 Crank seal dimensions
Pretty sure I just found it in the service manual I found here on the site. Page 7 shows the information.
30X72X8 and 30X48X8. |
|
|
|
|
03-29-2018, 11:34 AM
|
#3 |
|
Gone Wild
Join Date: May 2011
Location: Pittsburgh
Posts: 2,942
|
Re: 1981 G1 Crank seal dimensions
There should be a million different vendors that sell those without the need for the actual dimensions? It's just as easy as ordering the parts and being done with it.
Unless, of course, you are trying to match something from a non-cart. I have done that with bearings. |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| '79 Crank / Oil Seal | Gas Harley Davidson | |||
| 1981 244cc 2pg case seal, gasket or not? | Gas EZGO | |||
| 1981 Ezgo axle seal replacement | Electric EZGO | |||
| crank seal | Gas EZGO | |||
| 1981 G1 crank seal question | Gas Yamaha | |||
Linear Mode
