|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-06-2012, 11:35 AM | #1 |
Not Yet Wild
Join Date: Mar 2012
Location: Thorold, ON
Posts: 13
|
83ish EzGo Gas Rebuild Help
Hey, Folks - Rebuilding a 1983 EzGo gasser. Motor was a basket case and needed a lot more work that i could ever imagined but this site has helped me maintain my sanity.
Well - There goes the budget. So today's big question - Who has the spec / size for the crank bolt for the driven clutch ? I've attached a picture of the engine tag. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-07-2012, 07:09 AM | #2 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: 83ish EzGo Gas Rebuild Help
Welcome to BGW Answer 3/8-16X31/2 long. Be advised there is a cupped washer and lock washer installed on the bolt before installing it.You may get away with using a standard large body washer to take its place but it was formed to keep dirt away from the splines K.
LOU |
05-07-2012, 07:11 AM | #3 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: 83ish EzGo Gas Rebuild Help
Sorry but I also think by the numbers your looking at an 82 cart K.
|
05-07-2012, 03:36 PM | #4 |
Not Yet Wild
Join Date: Mar 2012
Location: Thorold, ON
Posts: 13
|
Re: 83ish EzGo Gas Rebuild Help
Thanks for the tip, Lou.
It's an 82 engine going in an 83 cart i guess. Kind of a hybrid. Anyway it appears that my crank bolt issue then comes down to the Comet Duster clutch that came in the box of parts. I seem to need a longer bolt. Off to Nut and Bolt supply tomorrow. |
05-07-2012, 04:21 PM | #5 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: 83ish EzGo Gas Rebuild Help
Thought you said driven. The drive bolt is 7/16 fine X5 1/2
|
05-07-2012, 04:41 PM | #6 |
Not Yet Wild
Join Date: Mar 2012
Location: Thorold, ON
Posts: 13
|
Re: 83ish EzGo Gas Rebuild Help
I did say driven. Some days I'm just not too smart .....
Thanks again, Lou. |
05-10-2012, 07:49 AM | #7 |
Not Yet Wild
Join Date: Mar 2012
Location: Thorold, ON
Posts: 13
|
Re: 83ish EzGo Gas Rebuild Help
So I got a bolt yesterday and just before I button this baby up can someone confirm that i have the clutch pucks in correctly ?
I'm including a before picture so you can see what I had had to start with. Apparently it had been used in a demolition derby ..... |
|
|
Similar Threads | ||||
Thread | Forum | |||
My EZGO 295 rebuild... | Gas EZGO | |||
My 98 EZGO TXT Rebuild | Lifted Golf Carts | |||
96 EZGO TXT Rebuild | Gas EZGO | |||
96 EZGO Rebuild | Electric EZGO | |||
99 ezgo rebuild | Members Rides |