|
02-21-2014, 10:24 PM
|
#1 |
|
Gone Wild
Join Date: Aug 2013
Posts: 211
|
clutch spring advice please
Just ordered a low end torque spring. Can anyone give some advice on the install. I will have everything out of my cart this weekend because I'm swapping everything from one cart to another cart. Installing a lift and bigger tires, so I like how my clone runs now but the cart I'm putting this on will be longer and heavier so thats why I bought the torque spring. Thanks again
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-22-2014, 12:32 AM
|
#2 |
|
Call me Rich
Join Date: Mar 2011
Location: Western NY
Posts: 1,156
|
Re: clutch spring advice please
I used a treaded rod from a automotive coil spring tool kit and some ball joint press adapters to compress the clutch, then there is a snap ring that has to be removed. Once thats out you can uncompress the cutch, swap springs and reassemble. The new springs doesnt have the locater "tangs" on it like the original so it goes in any way. You may want to replace the clutch buttons when its apart also.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Replace Drive Clutch Spring Without Removing Clutch? | Gas EZGO | |||
| Clutch Help - G1 Drive Clutch Spring | Gas Yamaha | |||
| torque spring advice | Gas Club Car | |||
| G2 driven clutch factory spring setting vs stiff spring. | Big Block Talk! | |||
| Spring advice | Gas EZGO | |||
Linear Mode
