1995 Yamaha valve adj screw

[Itshowtime]

Hello all, I have a 1995 Yamaha g14 gas cart that I just recently bought and I went to adj the valves and a snapped the valve adj screw. Not thinking it was a big deal but now I'm looking everywhere and part is obsolete. They sell the jam nut but not the adj screw. The Yamaha part # is J381215900-00 is there a cross reference number for this part? Any help would be much appreciated.

[Itshowtime]

Valves are fixed went to junk yard and got a set. New problem is FUEL. Motor starts with starter fluid, change vacuum line changed all lines and checked gas cap and installed new fuel pump. Valves are adjusted. I even primed the gas line thinking it needed a pull but still wont get fuel. Any Idea???????? I am ready to put a fuel cell and let it gravity feed but would rather keep it stock.

[agkfun99]

I own a G-14 and can tell you they are extremely touchy where air and fuel are concerned. Make sure your airbox is completely sealed tight and that all 3 airbox straps are secure. That's all it takes to lose vacuum pressure and fuel not get pulled into the fuel line by the pump. I have had the same problem in the past with mine. I also got rid of all the original pinch clamps for the fuel and vacuum lines and went to the small radiator hose clamps.