Magnet vs PQ Bandit?

[yawood]

The other thing I have read regarding the magnet (& the Bandit too I think) is that you lose regen. If that is important to you then Alltrax is the way to go.

[Jmbeebe0722]

Regent is not a huge factor for me, torque and speed are #1.

[klubber]

Sounds like bandit is the way to go, but do you reallly need that $1500. Alltrax, cables, solenoid ?

[Muddog]

My buggie couldn't pull itself out of soft sand.
I upgraded to 500 amp Curtis ,4ga cable and HD solenoid.
Now it shoots rooster tails in the sand.
Pulled a neighbor's locked up lawn tractor out of his yard like it wasn't there.
Didn't gain any real speed, but now I don't lose speed on the hills.
On a sepex, aftermarket controllers don't restrict your motor to speed codes,
so you can realize the full potential of your motor.
I'd start with controller, cable and Hd solenoid upgrade, I think that will get you what you want. If not, Plum Quick your motor.

[Jmbeebe0722]

If I do a controller upgrade, I won't look to do a solenoid or cable upgrade.. So I would stick with a Alltrax XCT300. Questions is, will this give me any speed difference... Currently I run 13-14mph. Looking to get 21-25mph.

[yawood]

In answer to a question in another thread, TahoeDawg (David from Revolution Golf Cars) said...

Originally Posted by TahoeDawgZ71

The Alltrax XCT300 IQ/Excel controller will give you the results you're looking for. Low to mid 20s for speed, with more of an increase in torque than just a motor swap. Solenoid and cable upgrades are not necessary with the 300 amp controller. The factory stuff can handle it just fine. The controller is plug-n-play for both the IQ and Excel system.

That seems to answer your question too.