|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-22-2017, 11:35 AM | #11 |
Not Yet Wild
Join Date: Dec 2017
Posts: 17
|
Re: 2002 Yamaha G22 blown head gasket?
Any idea where I can find things like head torque specs? I've been searching all over the place and haven't found any good information for the G16.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-22-2017, 11:44 AM | #12 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,313
|
Re: 2002 Yamaha G22 blown head gasket?
36 ft-lbs, according to the manual
|
12-22-2017, 11:45 AM | #13 |
Not Yet Wild
Join Date: Dec 2017
Posts: 17
|
Re: 2002 Yamaha G22 blown head gasket?
|
12-22-2017, 07:20 PM | #14 |
Not Yet Wild
Join Date: Dec 2017
Posts: 17
|
Re: 2002 Yamaha G22 blown head gasket?
Blown head gasket was the culprit. One of the bolt holes in the jug is stripped and will need to be heli-coiled and I see one other has been heli-coiled in the past. Strange considering the cart hasn't had much use and you can still see the cross hairs in the cylinder wall. Will have to order a head gasket and a M10 x 1.25 heli-coil and throw it back together.
Sent from my SM-N910V using Tapatalk |
12-22-2017, 08:49 PM | #15 |
Gone Wild
Join Date: Jun 2015
Location: Philippines
Posts: 570
|
Re: 2002 Yamaha G22 blown head gasket?
dragstang86, PM sent
|
12-23-2017, 12:22 AM | #16 |
Gone Wild
Join Date: Sep 2017
Location: Kankakee, Il
Posts: 194
|
Re: 2002 Yamaha G22 blown head gasket?
I like time sert better than helicoil, used them on a jet ski and still flawless.
|
12-23-2017, 12:58 AM | #17 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: 2002 Yamaha G22 blown head gasket?
Was hoping it was just a loose bolt but at least you found out why it was blown out. weather you use a helicoil or time sert either one should hold the recommended torque or 36 ft lbs... Let us know how it works out
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
blown head gasket | Gas Columbia ParCar | |||
G2 will not run, blown head gasket? | Gas Yamaha | |||
Is it likely I have a blown head gasket? | Gas EZGO | |||
Head gasket | Gas EZGO | |||
Blown gead gasket. | Gas Club Car |