|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-06-2018, 08:35 AM | #1 |
Not Yet Wild
Join Date: Jun 2018
Posts: 1
|
G16 knuckle needed
Hello all new member looking to get a little help identifying and locating a part. My god daughter got a little wild on my golf cart and ran into the side of the house. No body damage but she did bend the some steering and suspension parts up preaty bad. Looking for help in identifying some replacement parts. It’s the steering knuckle for both sides. I’ve seen a ton all over the net but none that match what I got. All ones I see are flat and the one on my cart has a step to it. My cart does have a lift to it, which appears to be a 6”. Any help you all could give would be greatly appreciated.
2001 Yamaha G16 / Gas 6” lift on 23” Kenda’s |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-06-2018, 08:53 AM | #2 |
Getting Wild
Join Date: Apr 2017
Posts: 134
|
Re: G16 knuckle needed
Sounds like maybe tie rods you need? If so I just go to buggies unlimited is where I got mine from a couple of months ago
Sent from my iPhone using Tapatalk |
06-06-2018, 12:42 PM | #3 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: G16 knuckle needed
Pictures would help us identify it to a t
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Ds steering knuckle | Golf Carts and Parts | |||
g1 front knuckle spindles? | Golf Carts and Parts | |||
Knuckle Arm / Knuckle Head :-) | Gas Yamaha | |||
Knuckle arms keep bending | Gas Yamaha | |||
steering knuckle bushing?? | Electric EZGO |