|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-18-2018, 10:09 AM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2018
Posts: 5
|
lights, turn signals not working
I just purchased a 2018 Yamaha Adventurer gas golf cart and my son in law and I was attempting to add a lighted license plate to the cart so we spliced into the wires going to the rear lights. The issue is we could not get the plate to light and in attempting to figure out why my son in law did something to cause the lights and turn signals to stop working. The fuses are good but the fuse box that holds the fuses is getting power to all the fuses except for the run that is for the lights. I do not know what would cause the fuse box to not have power to only the one fuse in the box - all the rest are working and none of the fuses were blown.
Does anyone have any ideas ? Tim |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
| Tags |
| 2018 yamaha adventurer |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Brake Lights..Turn Signals Not Working | Electric Club Car | |||
| Front LED Lights w\ Turn Signals | Electric Club Car | |||
| turn signals don't work with lights on. | Electric EZGO | |||
| 2004 Precedent, turn signals not working? | Electric Club Car | |||
| Wiring for Head ligths, Tail Lights, Brake Lights and Turn Signals | Gas EZGO | |||
Linear Mode
