Curtis Programmer Questions

[Z7What]

Could someone please explain to me what these options are?

Wayne

[Sergio]

Pedal Up mode = How much Regen is applied when you take your foot off the accelerator (0=no Regen brake)

Speed Cal = It is used to lower the maximum speed (0 = highest speed)

S3 FWD Speed = Speed code 3 maximum speed (14.8mph = maximum speed)

Control Mode, Anti-Temper, Deterrent Demo = Used only with the Visage system (0=OFF)

Excel Braking = The brake applied while the accelerator is DOWN but the cart is exceeding the speed proportional to the accelerator pedal position , typically only happens when going down hill.

Walkaway Deterrent = Dynamic brake used to stop/slow the cart when it is rolling unintentionally.

[Z7What]

Originally Posted by Sergio

Pedal Up mode = How much Regen is applied when you take your foot off the accelerator (0=no Regen brake)

Speed Cal = It is used to lower the maximum speed (0 = highest speed)

S3 FWD Speed = Speed code 3 maximum speed (14.8mph = maximum speed)

Control Mode, Anti-Temper, Deterrent Demo = Used only with the Visage system (0=OFF)

Excel Braking = The brake applied while the accelerator is DOWN but the cart is exceeding the speed proportional to the accelerator pedal position , typically only happens when going down hill.

Walkaway Deterrent = Dynamic brake used to stop/slow the cart when it is rolling unintentionally.

You the man! Thanks!

I had the dealer originally turn the regen braking completely off but have since decided after lifting it I want to have it back but set low so I’ll be moving that to 1. Thanks Again!!

Wayne

[ECP]

What year club car and what cable are you using to communicate with the controller? No success here with a 2021 HP li ion and Curtis 1313

[Z7What]

Originally Posted by ECP

What year club car and what cable are you using to communicate with the controller? No success here with a 2021 HP li ion and Curtis 1313

2011 Precedent

Curtis 1313-4331 Programmer. Currently the cable im using is the included one that plugs directly into the controller vis a square 4 pin connector, which requires me to crawl under the cart to plug it in.

I just ordered the adaptor so I can use the circle plug that's under the dash.

Wayne

[kgsc]

Too late but you probably could have just changed out the round plug under the dash for the square one or relocate the plug with an extension cable.

[ECP]

Originally Posted by Z7What

2011 Precedent

Curtis 1313-4331 Programmer. Currently the cable im using is the included one that plugs directly into the controller vis a square 4 pin connector, which requires me to crawl under the cart to plug it in.

I just ordered the adaptor so I can use the circle plug that's under the dash.

Wayne

I ordered that same adapter but to find out the cart is different.

IMG_3670.jpg

62957987610__79D33FD2-F901-4439-97F7-B89C5531E69D.jpg

[Z7What]

Originally Posted by kgsc

Too late but you probably could have just changed out the round plug under the dash for the square one or relocate the plug with an extension cable.

I thought about that but when using it on other carts i would have to crawl under it. This way i will no longer have to crawl under it.

Originally Posted by ECP

I ordered that same adapter but to find out the cart is different.

Attachment 213334

Attachment 213335

Well ****, ill have to look at my cart when i get home.

What year is yours?

Wayne

[ECP]

Originally Posted by z7what

well ****, ill have to look at my cart when i get home.

What year is yours?

Wayne

2021

[Z7What]

Originally Posted by ECP

2021

That might be why. Although I didn't look at the adaptor to see the pin configuration, the dealer I bought the cart from had one that looked identical to the one you pictured above, which is the one I ordered. Guess we shall see when it comes in!

Wayne