93 2-Cycle vibration

[tguellich]

For a few days now my cart has had a slight loss of power and a strong vibration when at full throttle. I pulled the driven clutch and replaced the bumpers just in case but it looks fine. I jacked it up and ran it, it appears to happen when the drive (front) clutch is 1/2" from fully engaged to fully engaged and continues while in. The clutch isn't sticking. Do you think this is the front clutch crapping out or something else? Could it be in the motor? Thanks for the help guys.

[ez go go]

I do know that the drive clutch has some balancing pucks inside of it, maybe your problem is there. Does the clutch have a rattling in it?

[tguellich]

No rattle that I can hear clearly, but that doesn't mean it isn't there. The black plastic cover on the clutch has about 8 bolts holding it on. Can I remove those bolts and the cover to get a look at rthwe guts and get it back on while on the cart?

[ez go go]

I have never been into the drive clutch on or off the cart so I am at a loss there. You might pm scotty or mike and ask. I have always been told the drive clutch has no serviceable parts on the inside so I never took one apart. Wish I knew!!