|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-02-2010, 07:12 PM | #1 |
Not Yet Wild
Join Date: Oct 2010
Posts: 4
|
93 marathon won't move in gear
OK this cart is getting the best of me, I'm ready to take the plasma arc to it. I posted on here last week & got alot of help, and it is agreed that I should put new rings in my cart. I am getting some smoke, but I have been driving it around the house. Now I went to move it & nothing. If i put it in neutral position I can start it & it revs to full rpm's, as soon as I stop & put it in gear it only goes to about 1/2 rpm & no movement. I put it on stands & tried it & the clutch sheevs on both drive & driven moved in & out like normal the engine went to full rpm & the wheels moved in each gear. I'm confused or it's something that I'm missing as to what the problem is. I would greatly appreciate any help anyone can throw at me.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-02-2010, 07:40 PM | #2 |
Getting Wild
Join Date: Nov 2010
Location: California
Posts: 93
|
Re: 93 marathon won't move in gear
Could be brakes grabbing.
|
12-02-2010, 07:58 PM | #3 |
Not Yet Wild
Join Date: Oct 2010
Posts: 4
|
Re: 93 marathon won't move in gear
I can put it in neutral position on the shifter & push it easy, so not the brakes.
|
12-05-2010, 05:13 AM | #4 |
Not Yet Wild
Join Date: Aug 2009
Location: bay city mi
Posts: 62
|
Re: 93 marathon won't move in gear
try looking at the hubs they are splined to fit the axles el wappo
|
12-05-2010, 09:47 PM | #5 |
Doin' the Wild Thang
Join Date: Mar 2010
Location: Greenville, AL
Posts: 1,063
|
Re: 93 marathon won't move in gear
Moving the weight of the cart and the driver could be the power problem depending on how badly it needs rings. I would check the comp. to see the values then look at your valve lash for some adjustment. I would check those hubs like el wappo says but it seems like a comp. issue without actually seein what it's doin.
|
12-05-2010, 10:25 PM | #6 |
WILD
Join Date: May 2007
Location: lebanon county,pa
Posts: 1,266
|
Re: 93 marathon won't move in gear
Sounds like its time for a new hub, have someone hit the petal while its in gear and see if the axle nut is spinning,whatever axle nut is spinning will be the bad one(u have to remove the cap if its still on).If neither are spinning make sure your rear clutch isnt spinning on the shaft going into the rear.Report back if that was it or not.
casey |
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB: 91 marathon input gear | Electric EZGO | |||
89 marathon, Move up to 42 volt? | Electric EZGO | |||
Exploded view of Marathon steering gear w/PN | Electric EZGO | |||
94 Marathon - Quick Start, Now It Won't Move | Electric EZGO | |||
Marathon stock gear ratio? | Gas EZGO |