|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-25-2012, 10:13 PM | #1 |
Not Yet Wild
Join Date: Aug 2012
Posts: 3
|
Missing Screws for Yamaha G16
Can someone please give me the screw sizes for the following (Want to pick up from box store):
1.) Access Panel Truss Screw 2.) Front screw to hold roof support to frame. 3.) Bolt to hold rear roof support to back seat frame (Goes through to support bars). 4.) Rivets to hold driver rear fender panel. Thanks Carla |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-26-2012, 08:03 AM | #2 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Missing Screws for Yamaha G16
Carla, can't help you except I think the rivits are, 3/16x5/8 long.
number 2, is a stud, (only Yamaha will have this part) |
08-27-2012, 07:51 PM | #3 |
Gone Wild
Join Date: Nov 2009
Location: Kentucky
Posts: 287
|
Re: Missing Screws for Yamaha G16
Welcome to bgw! I would suggest a variety pack of screws from a local Walmart if a golf cart supplier is not convenient. Rivets will need a rivet gun to install. Where are you located?
|
08-29-2012, 08:19 AM | #4 |
Not Yet Wild
Join Date: Aug 2012
Posts: 3
|
Re: Missing Screws for Yamaha G16
Right outside St Louis, MO
|
08-31-2012, 01:33 AM | #5 |
Not Yet Wild
Join Date: Jun 2012
Location: Snohomish, WA
Posts: 45
|
Re: Missing Screws for Yamaha G16
Access panel screw is actually a plastic rivet similar to the ones holding on the bagwell liner. You could convert it to a screw with a clip/U nut similar to this
http://www.clipsandfasteners.com/1_4...as9848-100.htm just measure the distance from the edge of the panel to the hole to get the right size. You may have to go to a auto parts store for both the plastic rivet or the clip nut. The bolts holding the rear top support are either 2 1/2 or 3" long by 5/16. Use a flat washer, one each side, with a nylock nut on each of the four bolts. |
|
|
Similar Threads | ||||
Thread | Forum | |||
g2a yamaha missing when taking off from stop. | Gas Yamaha | |||
Screws missing on my Engine, Clubcar President 200 4 | Electric Club Car | |||
Questions on Carb Screws | Gas EZGO | |||
Rusty Screws - What did they look like new? | Electric EZGO | |||
Are these the right screws? | Electric Club Car |