|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-25-2013, 07:20 AM | #1 |
Gone Wild
Join Date: Jul 2011
Posts: 389
|
G1 breakin
Hello, i just rebuilt my 81 g1 and how many hrs is good for breaking it in? I mixed a little more oil in it for breaking it in, thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-25-2013, 07:38 AM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: G1 breakin
Did you use a good assembly lube or 2 cycle oil when you assembled?
If it starts right up and runs smooth and quiet, just drive it around very easy for a couple days, no high speed runs, no pulling trailers etc. Then gradually ease into it over the next week. You'll be fine. The rings will seat in pretty fast, and the bearings are all rollers so they don't need breaking in, provided they were oiled up prior to assembly. |
03-25-2013, 09:11 AM | #3 | |
Gone Wild
Join Date: Jul 2011
Posts: 389
|
Re: G1 breakin
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Battery breakin or break in procedure procedures | Electric Club Car |