|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-28-2013, 06:56 PM | #1 |
Not Yet Wild
Join Date: Nov 2012
Posts: 53
|
What cable
I found the cause of the back fire issue on the cart, the plate was staying open. The cable that goes from the pedal to the carb is about 1/4" to short. The cable measures 32".
What cable are y'all using and what source did y'all get it from? I have a lift on my cart and I think that is the issue. I called about four local golf cart shops today and got the lecture from all of them on how I should not by pass the go governor (ya ya ya), but no one could come up with the cable. I then went to local lawn mower shops and pretty much got told if don't say husqy or Deere on it we don't got it (spit). I try to find cable making material so I could make my own but the was fruitless. Thanks for the help. Scott Ross |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-28-2013, 07:13 PM | #2 |
Gone Wild
Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
K why kinda/ year Yamaha you have...the cable should go from your pedal to the gov...then another cable goes from gov to carb...and I've never had to change one out because of a lift because they are both adjustable...
|
05-28-2013, 07:18 PM | #3 |
Guest
Posts: n/a
|
Re: What cable
|
05-28-2013, 07:26 PM | #4 | |
Not Yet Wild
Join Date: Nov 2012
Posts: 53
|
Re: What cable
Quote:
I called two of the site sponsors with both referring me to local shops. And also if I can get a part number or other I info that may help with telling them what I want. |
|
05-28-2013, 07:28 PM | #5 |
Gone Wild
Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
Oh I gotcha...well I can't give ya a part number from Yamaha( as I am a Yamaha dealer and we don't bypass anything of course) for a cable just for that...sorry I couldn't help ya out more
|
05-28-2013, 07:38 PM | #6 |
Not Yet Wild
Join Date: Nov 2012
Posts: 53
|
Re: What cable
Thanks for looking. I have learned a lot about my cart lately. I do want to find the cone filter for the carb if you can help with that.
|
05-28-2013, 07:49 PM | #7 | |
Guest
Posts: n/a
|
Re: What cable
Quote:
Accelerator Cable for YAMAHA 4 CYCLE GAS G16 - G22 MODELS MEASURES 32 3/4" LONG THIS IS AN AFTER MARKET CABLE YAMAHA Assigned Part OEM # JN6-F631201 http://www.justgolfcarts.com/accayagasg1g.html hope this helps .. if not don't beat me |
|
05-28-2013, 08:35 PM | #8 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: What cable
On the Yamahas',I bypass the governor by making a tab that both cables hook to,instead of hooking thru the governor.I use a piece of heavy-guage tin(just under 1/8",but 1/8" will work)drill 2 holes about 7/8" apart,and connect the 2 cables from the governor to the plate.Then check your throttle for travel,and also butterfly-closure,adj. as necessary.Works great,done a few of them this way now.Hope this helps.
|
05-28-2013, 09:32 PM | #9 | |
Not Yet Wild
Join Date: Nov 2012
Posts: 53
|
Re: What cable
Quote:
That would be perfect....thanks. Other than the disclaimer it should be perfect. The part about PROFESIONAL and DEATH reall y caught my eye. |
|
05-28-2013, 09:33 PM | #10 | |
Not Yet Wild
Join Date: Nov 2012
Posts: 53
|
Re: What cable
Quote:
|
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Shift Cable or F&R Cable Adjustment | Gas Yamaha | |||
Convert dual cable shifter to single cable shifter? | Gas EZGO | |||
Cable ends for #2 welding cable | Lifted Golf Carts | |||
F&R single cable to dual cable? | Big Block Talk! | |||
cable set.. | Electric Club Car |