lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Harley Davidson


Post New Thread  Reply
 
Thread Tools Display Modes
Old 07-06-2009, 06:03 PM   #1
OneTuscani
Not Yet Wild
 
Join Date: Jun 2009
Posts: 8
Default Custom Electric Harley

I bought an old Harley DE3 with 5 silinoids. The motor has 4 leads A1, A2, S1,S2 What is the purpose of each lead. It used to be gas but the previous owner switched it to electric. I am tempted to tear it all out and re do all the wiring. It is a 36v motor. Has Six 6-volt batteries. I have found the correct wiring diagram but there is a piece on the cart that is wired in but no diagram shows it? I am wondering if its from when it was gas and if I can remove it and skip it all together to match the wiring digram. It is located mounted right in front of the far right silinoid. Here is a picture of it! Also where is a good cheap place to pick up a silinoid and what should I expect to pay? Are there ones that are better than others or will any do? Anyone know of a good place to buy plain 4gauge wire and the connectors online? I think it would be cheaper to but a bulk role of wire and get terminals seperate, but maybe not?
Attached Images
File Type: jpg TOP.jpg (47.6 KB, 25 views)
File Type: jpg BOTTOM.jpg (42.4 KB, 27 views)
File Type: jpg SDC10188.jpg (58.8 KB, 33 views)
OneTuscani is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 07-07-2009, 06:54 AM   #2
OneTuscani
Not Yet Wild
 
Join Date: Jun 2009
Posts: 8
Default Re: Custom Electric Harley

Anybody know what that little thing is or can I just skip it?
OneTuscani is offline   Reply With Quote
Old 07-07-2009, 01:16 PM   #3
OneTuscani
Not Yet Wild
 
Join Date: Jun 2009
Posts: 8
Default Re: Custom Electric Harley

One of you brilliant electrical people out there have to know what this is and what it does. Hopefully I get a reply soon. I am stripping it all down tonight to start sanding and I have to weld in some new bars that go under the batteries as the old ones are almost rusted out. Then I want to remove all these little extra parts that were there from when it was a gas setup, and I bought the spray on Line-X!
OneTuscani is offline   Reply With Quote
Old 01-26-2010, 07:23 PM   #4
Boatman
Not Yet Wild
 
Boatman's Avatar
Harley Davidson
 
Join Date: Jan 2010
Location: woods of Missouri
Posts: 10
Default Re: Custom Electric Harley

ok That thing in Pic 1 and 2 is the Delay tube socket

looks like it has been bypassed
The delay is for 4th speed engagement
Boatman is offline   Reply With Quote
Old 07-31-2010, 07:59 AM   #5
danchalf14
Not Yet Wild
Club Car
 
Join Date: Jul 2010
Location: Tampa Fl. and Union City,MI. in Summer
Posts: 11
Default Re: Custom Electric Harley

A1 and A2 are the Armature connections and go to the Brushes, F1 and F2 are for the Field coils.
danchalf14 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Harley Davidson


Thread Tools
Display Modes


Similar Threads
Thread Forum
Harley MGIV electric Test Post
my custom g1 Lifted Golf Carts
Harley Gas to Electric Help! Harley Davidson
2008 EZ-GO lifted custom electric cart Golf Carts and Parts


All times are GMT -5. The time now is 07:13 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.