What rivet kit should I use

[Bolweevle]

I am new to carts and I have a ezgo st sport 11 and I'm going to be taking it apart to paint it. I was wondering if anyone knew if there is a rivet kit I can buy so I can put it back together? It has the urothane front and the metal body Also I am wondering what parts cosmetic wise will fit on it such as a windshield and such.the cart also has the bed removed and a seat put in its place. I'm also wanting to put some tail lights on it I'm hoping the plastic fenders will hold the lights. Any help will be appreciated image.jpg

[kgsc]

Ezgo part 608456 body rivet kit is the replacement but the rivets for the lower body use a 1/4 inch rivet gun. The rest are 3/16.

[Bolweevle]

thank you so much kgsc

do you know if a regular txt windshield will fit the st sport II

[kgsc]

To be honest I can't say 100%. Some windshields have slots cut in them to go around the rubber bushings on the uprights. Some just sit on top. I have put the ones with the slot on top of the bushings with the ST cowl to clear but sometimes the windshield hits the roof. If you add a 1/2 inch spacer like the ones already there it will usually clear. Post some measurements and I will look at mine as well I am sure others will also.