|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-25-2015, 09:20 AM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2015
Posts: 3
|
1996 EzGo Forward / Reverse Switch Question
I have a 1996 Electric Ezgo with a forward / Reverse selector under right knee and run / tow switch and believe DCS. This may be a simple question, when the selector is in the forward position the left (forward) switch is engaged, but when in the reverse position both the forward and reverse micro switched are engaged. Is this correct? Any help would be much appreciated.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-25-2015, 09:36 AM
|
#2 |
|
Stay thirsty my friends!
 Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,286
|
Re: 1996 EzGo Forward / Reverse Switch Question
Welcome to BGW!
That is correct operation. |
|
|
|
|
08-25-2015, 09:39 AM
|
#3 |
|
Not Yet Wild
Join Date: Aug 2015
Posts: 3
|
Re: 1996 EzGo Forward / Reverse Switch Question
Thank you!
|
|
|
|
|
08-25-2015, 10:01 AM
|
#4 |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 1996 EzGo Forward / Reverse Switch Question
The two switches are "Run" and "Reverse", rather than "Forward" and "Reverse". (See attached schematic.)
The DCS controller defaults to Forward when it powers up and has the be told to go into the Reverse mode. |
|
|
|
|
| Tags |
| f/r switch |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Question of forward/reverse switch | Electric EZGO | |||
| Forward/reverse switch question. | Gas Club Car | |||
| Question about wiring from forward/reverse switch | Electric EZGO | |||
| Forward Reverse switch melted on forward...have question about replacement part | Electric Club Car | |||
| EZGO forward reverse switch | Electric golf carts | |||
Linear Mode
