Radio relay install 2006 st issue

Bulldawg RC · 10-31-2015, 04:19 PM

I installed an amplified Bluetooth speaker system and I am having difficulty with the relay switch. I am trying to use the key switch to turn it on and off but having trouble locating proper wire. I finally gained access to switch and noticed a red, black, 2blue, and a green and blue that run to solenoid. Anyone have experience with which wire is the on position of switch? Thanks for help. I have searched and have not found a ton of help

Bulldawg RC · 11-01-2015, 09:06 AM

I tried using several wires and only was able to get either constant power or power when pushing the pedal. May have to install interrupted switch if I can't figure it out.

Bulldawg RC · 11-09-2015, 11:26 AM

Bueller? Bueller?

tegger · 11-12-2015, 07:28 AM

You might have to get a voltmeter and test each wire coming off the switch to find the ON power.

On my ST350, the blue powered up the lights. According to the diagram I have, the red is the one that gets juice when the main switch is turned to the ON position.

gotti · 12-31-2015, 11:14 AM

I just added a toggle switch directly connected to the battery with an inline fuse. It takes the place of a switched ignition wire.

10-31-2015, 04:19 PM	#1
Bulldawg RC Not Yet Wild Join Date: Dec 2011 Posts: 13	Radio relay install 2006 st issue I installed an amplified Bluetooth speaker system and I am having difficulty with the relay switch. I am trying to use the key switch to turn it on and off but having trouble locating proper wire. I finally gained access to switch and noticed a red, black, 2blue, and a green and blue that run to solenoid. Anyone have experience with which wire is the on position of switch? Thanks for help. I have searched and have not found a ton of help
Bulldawg RC Not Yet Wild Join Date: Dec 2011 Posts: 13

11-01-2015, 09:06 AM	#2
Bulldawg RC Not Yet Wild Join Date: Dec 2011 Posts: 13	Re: Radio relay install 2006 st issue I tried using several wires and only was able to get either constant power or power when pushing the pedal. May have to install interrupted switch if I can't figure it out.
Bulldawg RC Not Yet Wild Join Date: Dec 2011 Posts: 13

11-09-2015, 11:26 AM	#3
Bulldawg RC Not Yet Wild Join Date: Dec 2011 Posts: 13	Re: Radio relay install 2006 st issue Bueller? Bueller?
Bulldawg RC Not Yet Wild Join Date: Dec 2011 Posts: 13

11-12-2015, 07:28 AM	#4
tegger Gone Wild Join Date: Jul 2010 Location: Central Delaware, USA Posts: 174	Re: Radio relay install 2006 st issue You might have to get a voltmeter and test each wire coming off the switch to find the ON power. On my ST350, the blue powered up the lights. According to the diagram I have, the red is the one that gets juice when the main switch is turned to the ON position.

12-31-2015, 11:14 AM	#5
gotti Gone Wild Join Date: Dec 2015 Location: Alabama Posts: 226	Re: Radio relay install 2006 st issue I just added a toggle switch directly connected to the battery with an inline fuse. It takes the place of a switched ignition wire.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
New radio install	Electric EZGO
Radio Install.	Electric EZGO
Czonka Relay install help	Electric EZGO
Install radio 2006 ez go	Electric EZGO
Radio install	Design Center