|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
11-16-2015, 01:17 PM
|
#1 |
|
Gone Wild
 Join Date: Nov 2012
Posts: 164
|
What solenoid should I use
I have a western golf cart 42 volt with 2 gauge cables and alltrax dcx controller. I have not had good luck with suggested HD solenoids MZJ200Das I went through a couple of them and I need one now,so I'm looking at a MZJ400D super heavy duty solenoid from Scottyb but don't if I should order a 48V or 36-48v. I have been using 48 volt. Now I see they have a New HD solenoid model SW180. I want the best solenoid but don't know what to order. Suggestions?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-16-2015, 02:55 PM
|
#2 | |
|
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,998
|
Re: What solenoid should I use
Quote:
|
|
|
|
|
|
11-16-2015, 03:41 PM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: What solenoid should I use
Solenoids prefer to operated below rather than above their rated coil rating. Use a 48v solenoid in a 42v system
There is no reason the MZJ200 solenoid is not sufficient for a 400a comtrol. However if you wish to upgrade try the top stud SW180 with it's magnetic blowout feature.  |
|
|
|
|
11-16-2015, 04:37 PM
|
#4 |
|
Gone Wild
Join Date: Nov 2012
Posts: 164
|
Re: What solenoid should I use
Thanks,I just ordered a SW180 from Scottyb,no sense fooling around.
|
|
|
|
|
11-16-2015, 04:53 PM
|
#5 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: What solenoid should I use
Quote:
Follow the included instructions and watch the polarity for big and small wires.  |
|
|
|
|
|
11-16-2015, 06:17 PM
|
#6 |
|
Gone Wild
Join Date: Nov 2012
Posts: 164
|
Re: What solenoid should I use
It took scottyb 39 minutes to fill and send my order,I don't know why it took him that long,but if I need anything else I'll give him another try.
|
|
|
|
|
11-17-2015, 09:27 AM
|
#7 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: What solenoid should I use
39 minutes from purchase to shipping?
Don't tell people that... They will expect it all the time.  |
|
|
|
|
11-17-2015, 06:11 PM
|
#8 |
|
Gone Wild
Join Date: Nov 2012
Posts: 164
|
Re: What solenoid should I use
I'm originally from New York and I have waited longer than that for someone to take an order,let alone fill it.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Help converting G1 solenoid setup to single G16 solenoid | Gas Yamaha | |||
| 36V solenoid???? | Electric Club Car | |||
| Bad Solenoid? | Gas Club Car | |||
| HD Solenoid for PDS | Electric EZGO | |||
| Solenoid | Electric Club Car | |||
Linear Mode
