03-21-2016, 01:28 PM | #1 |
Gone Wild
Join Date: Mar 2016
Location: Owasso, OK
Posts: 190
|
key switch
who has changed theirs i have had a few carts most of my EZGO switches have rusted, had a G16 that never did. I thought about using a boat ignition switch on my TXT or getting a Yamaha switch what else are you guys using
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-21-2016, 02:08 PM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,173
|
Re: key switch
If you just have the standard on/off switch it just has two terminals so you can use pretty much any SPST switch. I am surprised you have had issues with yours though. I have a couple that are pushing 15 years old.
|
03-21-2016, 08:21 PM | #3 |
Getting Wild
Join Date: Nov 2013
Location: Northern, IL
Posts: 120
|
Re: key switch
My last 2 builds I've used a Harley 2 wire switch.
|
03-22-2016, 09:45 AM | #4 |
Gone Wild
Join Date: Mar 2016
Location: Owasso, OK
Posts: 190
|
Re: key switch
its mainly been cosmetic but I would like to make it harder for others to just turn on with a screwdriver
|
03-22-2016, 09:50 AM | #5 |
Gone Wild
Join Date: Mar 2016
Location: Owasso, OK
Posts: 190
|
Re: key switch
|
03-22-2016, 10:02 AM | #6 |
going,.. going,.. gone!
Join Date: Apr 2014
Location: Third Rock from the Sun...Vegas baby!
Posts: 1,422
|
Re: key switch
Check out this thread:
http://www.buggiesgonewild.com/elect...ey-switch.html |
03-22-2016, 01:00 PM | #7 |
Gone Wild
Join Date: Mar 2016
Location: Owasso, OK
Posts: 190
|
Re: key switch
I got the Harley 3 wire to operate lights aswell I'll post results once it's in
|
03-22-2016, 09:09 PM | #8 |
Getting Wild
Join Date: Nov 2013
Location: Northern, IL
Posts: 120
|
Re: key switch
|
03-22-2016, 09:12 PM | #9 |
Getting Wild
Join Date: Nov 2013
Location: Northern, IL
Posts: 120
|
Re: key switch
3 wire isn't going to work for ignition & lights. You'll need a 4 wire 2 position switch. The ignition circuit only goes hot when you press the pedal (if you're cart is a gas cart).
|
|
|
Similar Threads | ||||
Thread | Forum | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
Replace light switch with 3-position key switch | Electric EZGO | |||
2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha |