|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-23-2017, 07:21 AM | #1 |
Not Yet Wild
Join Date: Aug 2016
Location: Lawrenceburg, IN
Posts: 30
|
G2 clutch spring upgrade
With the new long travel kit installed and governor removed, I need some better low end on the cart. Not wanting to do anything drastic or expensive. Is the umax spring a good place to start? Anything else I should look at replacing while I'm in there? Cart is only used on the street in town, struggles with take off and hills now. Hoping not to lose much on the top end. Thanks in advance for help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-23-2017, 08:06 AM | #2 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: G2 clutch spring upgrade
The umax spring is a good inexpensive upgrade for your secondary. Make sure that the sheaves aren't worn. Check the ramp shoes for wear and replace if necessary. If your spring seat/helix doesn't have the black ramps that attach with a fastener, (new, improved) I suggest that you replace it, too. The old style helix has ramps (white, I believe) that just push into place.
|
01-23-2017, 09:14 AM | #3 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,647
|
Re: G2 clutch spring upgrade
Agree with Dave's advice
|
01-23-2017, 09:32 AM | #4 | |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: G2 clutch spring upgrade
Quote:
|
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
||
01-23-2017, 10:23 AM | #5 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,647
|
Re: G2 clutch spring upgrade
The yamaha part # for the spacer is J55-46322-09
|
01-23-2017, 03:11 PM | #6 |
Not Yet Wild
Join Date: Aug 2016
Location: Lawrenceburg, IN
Posts: 30
|
Re: G2 clutch spring upgrade
Awesome guys, thanks for the advice. Does anyone have a parts drawing of the secondary clutch?
|
01-23-2017, 04:03 PM | #7 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: G2 clutch spring upgrade
G2 and G16 secondary
|
02-11-2017, 10:54 AM | #8 |
Not Yet Wild
Join Date: Aug 2016
Location: Lawrenceburg, IN
Posts: 30
|
Re: G2 clutch spring upgrade
Looks like mine has the white ramp shoes. Any recommendations on where to buy everything I need (spring, helix, spacer)?
|
02-11-2017, 11:08 AM | #9 |
Not Yet Wild
Join Date: Aug 2016
Location: Lawrenceburg, IN
Posts: 30
|
Re: G2 clutch spring upgrade
|
02-11-2017, 11:57 AM | #10 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: G2 clutch spring upgrade
The clip isn't on the drawing. If it's still on your cart, it fits into a groove on the input shaft and the spring seat fits up against it. It will be obvious if you already have a spacer in place.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Driven Clutch and spring upgrade | Gas Club Car | |||
Clutch Spring Upgrade | Gas Yamaha | |||
8:1 with Clutch Spring upgrade | Gas Yamaha | |||
Driven clutch spring upgrade?? | Gas Club Car | |||
03 TXT-Drive Clutch Spring Upgrade | Gas EZGO |