lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 04-17-2018, 08:23 PM   #1
Dando151
Not Yet Wild
E-Z-GO
 
Join Date: Mar 2017
Location: The bubble
Posts: 14
Smile Alltrax 300dcx programming

I am trying to find the programming directions for updating field maps on this controller.all the links I have found on previous posts do not work.. any one have step by step instructions? Thanks
Dando151 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 04-17-2018, 09:05 PM   #2
WalterM6
Gone Wild
 
WalterM6's Avatar
Club Car
 
Join Date: Apr 2017
Location: SE TN
Posts: 2,218
Default Re: Alltrax 300dcx programming

Here's the instructions I got from Alltrax.



Quote:
The following map is the better one to use with that motor.
Save the file to your desktop.
Double click the file and a new window will appear.
Select the "Extract all" option on the left hand side.
When prompted for a location to unzip the file, select your desktop.
Start ControllerPro as normal.
Under tools, select "Upgrade"
A new window will open and ask for a location for a file.
Select the .hex and hit "open"
Wait 30 seconds and then it will be done
WalterM6 is offline   Reply With Quote
Old 04-18-2018, 02:18 PM   #3
Dando151
Not Yet Wild
E-Z-GO
 
Join Date: Mar 2017
Location: The bubble
Posts: 14
Default Re: Alltrax 300dcx programming

Thanks for the info.
Dando151 is offline   Reply With Quote
Old 04-18-2018, 03:33 PM   #4
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: Alltrax 300dcx programming

The DCX either has to be in the cart or you need to make a power adapter for the 4 out 10 pins that need power to program if bench programming.
In the cart connect the serial to usb able you bought and installed the DRIVER for on your PC or laptop. The with the key on and the cart in neutral ( and one rear wheel off the floor for safety ) press the gas enough for the solenoid to click and hold it there ( piece of wood under the pedal and brick on top or a stick to the seat cushion? ) then and only then open the Pro39 program software and begin. Remember to hit save after changes and wait for the save button to change back to it's original color before closing the controller pro
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
xct 500 alltrax programming how to Electric Yamaha
Alltrax programming Electric EZGO
Alltrax Programming Electric EZGO
Alltrax axe programming Electric EZGO


All times are GMT -5. The time now is 07:09 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.