|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
11-24-2019, 12:08 AM | #1 |
Not Yet Wild
Join Date: Oct 2016
Posts: 53
|
Club car ds 1268 controller upgrade problem
Helping friend with a buggies unlimited upgrade kit. Where does the black and gray wire that has a terminal combining the 2 wire connect? We are getting fault code 1,2 on the led status light (Throttle fault 1). Also the solenoid does not engage even though all wires have proper volt readings and I tried a second solenoid to make sure it was a bad one.
Does anyone have a decent wiring diagram for a DS and the 1268 Curtis sepex controller? The included paperwork is not much help Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-30-2020, 01:35 PM | #2 |
Not Yet Wild
Join Date: Aug 2015
Posts: 3
|
Re: Club car ds 1268 controller upgrade problem
Did you ever figure out the gray / black wire? I'm having the same issue.
|
05-31-2020, 07:07 AM | #3 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Club car ds 1268 controller upgrade problem
They go to Controller B- to provide negative for the MCOR and for the speed sensor.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2010 EZGO PDS Curtis 1268 Upgrade problems | Electric EZGO | |||
1268 Cushman Hauler 1000 buzzer/controller problem | Electric EZGO | |||
I2 Excel upgrade to Curtis 1268 Controller Problems | Electric Club Car | |||
Curtis 1268 problem | Lifted Golf Carts | |||
Controller upgrade problem | Electric EZGO |